458025
96
Zoom out
Zoom in
Previous page
1/112
Next page
6 720 643 256 (2010/05)
96 | Energy saving tips US/CA
10 Energy saving tips
With outdoor reset controls, the supply
temperature is controlled in accordance with
the set heating curve: The colder the outdoor
temperature the higher the supply
temperature.
Save energy: Set the heating curve as low as
possible in accordance with the building's
insulation and the system conditions
(Æ section 8.3 from page 67).
Radiant floor heating:
Do not set the supply temperature higher than
the maximum supply temperature
recommended by the manufacturer (e.g.
140 °F (60 °C)).
Make effective use of the temperature levels
and switch points by setting them to suit the
preferences of the occupants.
Comfort = Comfortable living
environment
Economy = Active living environment
Frost = Away from home or asleep.
Set the thermostat valves in all rooms so that
the required room temperatures can be
achieved. Only increase the temperature
levels if the temperature has not reached after
some time (Æ section 6.2.2 on page 41).
Much energy can be saved by reducing the
room temperature via economy phases:
Reducing the room temperature by 1.8 °F
(1 °C): up to 5% energy can be saved.
Not recommended: To let the room
temperature fall below 60 °F (+15 °C) during
the daytime, otherwise the cooler walls
continue to radiate cold, the boiler works
harder to raise the rooms to the desired
temperature, leading to higher energy
consumption than if a constant heat supply
had been applied.
With well insulated buildings it can be the
case that the room temperature remains
above the temperature set for Economy.
Nevertheless energy is being saved as the
heating system stays off. In this case, you can
set the switch point for Economy earlier.
Don't keep windows cracked for ventilation.
This way, heat is always drawn out of the room
without noticeably improving the room air.
Vent briefly but intensively (open window
fully).
When ventilating, turn off the thermostatic
valve or set the mode selector to Frost.
Make effective use of the temperature levels
and switch points for the hot water by setting
them to suit the preferences of the occupants.
Solar optimization
Activate the DHW optimization by setting a value
between 1.8 °F to 36 °F (1 °C to 20 °C)
(Æ section 6.5 on page 50).
If the influence of the DHW optimization is too
great, reduce the setting a small amount at a
time.
Activate the Heating circuit optimization by
setting a value between 1.8 °F to 9 °F (1 °C to
C) (Æ section 6.5 on page 50).
If the influence of the Heating circuit
optimization is too great, reduce the setting a
small amount at a time.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 200 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 200

Bosch FW 200 Quick start guide - German - 2 pages

Bosch FW 200 Usermanual and installation guide - German - 84 pages

Bosch FW 200 Quick start guide - Dutch - 2 pages

Bosch FW 200 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info