458025
89
Zoom out
Zoom in
Previous page
1/112
Next page
6 720 643 256 (2010/05)
Troubleshooting | 89US/CA
Fault 13
System configuration: bus device changed
or replaced
Check system configuration for DHW or
start automatic system configuration.
157 See display text
1)
Fault 13
System configuration: bus device changed
or replaced
Check system configuration for heating
circuit x and connections on IPM for
heating circuit x.
158
159
See display text
1)
Fault 14
System configuration: incompatible bus
device
DHW is controlled by boiler. IPM control of
DHW is disabled.
117 See display text
1)
Identify incompatible BUS
device and remove from the
system.
Fault 14
System configuration: incompatible bus
device
IPM for tank must be set to ID 3 or higher.
118
119
See display text
1)
Fault 15
outdoor temperature sensor not connected
Outdoor temperature not available.
30 See display text
1)
Check outdoor temperature
sensor and remedy
interruption, if necessary.
Fault 19
Unable to save parameter settings
202 BUS device is configured but
not available at present.
Check system layout, check
system configuration, modify if
necessary and set parameter
again.
Fault 20
System configuration: invalid
192 Invalid ID in remote control for
the heating circuit.
In combination with FW 200
only ID 1 to 4 is possible in the
remote control.
Fault 21
System configuration: new bus device
135
137
139
See display text in the remote control
Fault 22
System configuration: bus device missing
178
179
IPM with ID x not detected on
the remote control.
Check connection and ID of
the IPM and adapt if
necessary.
Fault 23
System configuration: bus device changed
or replaced
159 System configuration for
heating circuit x and
connections on IPM for heating
circuit x not permitted.
Check system configuration for
heating circuit x and
connections on IPM for heating
circuit x.
Display (Æ Item 1, 3 and 4 in fig. 29)
Text Code Cause Remedy (by installer)
1) The display text is shown on the BUS device (e.g. remote control) that detected the fault. On the other BUS
devices, instead of this, the code is displayed and corresponds to the display test.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 200 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 200

Bosch FW 200 Quick start guide - German - 2 pages

Bosch FW 200 Usermanual and installation guide - German - 84 pages

Bosch FW 200 Quick start guide - Dutch - 2 pages

Bosch FW 200 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info