458025
79
Zoom out
Zoom in
Previous page
1/112
Next page
6 720 643 256 (2010/05)
Menu settings INSTALLER SETTINGS (for installers only) | 79US/CA
8.5.9 Parameters for thermal disinfection
Menu: Solar sys parameters > E Therm
disinfection
Use this menu if you want to thermally disinfect a
tank (option E).
Solar tank thermal disinfection: Use this
menu option to switch the thermal
disinfection of the solar tank on or off.
Yes: Thermal disinfection active The pump
(PE) is activated using the settings on the
menu Thermal disinfection
(Æ section 6.3.6 on page 48) and the
entire tank volume is warmed up to the
temperature required for thermal
disinfection. During the thermal
disinfection it is checked whether the
required temperature for the thermal
disinfection is reached at the bottom tank
temperature sensor (T
2
).
No: Thermal disinfection for the solar tank
not active.
Thermal disinfection tank B: Use this menu
option to switch the thermal disinfection of
the tank B on or off.
Yes: Thermal disinfection active The pump
(PE) is activated using the settings on the
menu Thermal disinfection
(Æ section 6.3.6 on page 48) and the
entire tank volume is warmed up to the
temperature required for thermal
disinfection. During the thermal
disinfection it is checked whether the
required temperature for the thermal
disinfection is reached at the top tank
temperature sensor (TB).
No: Thermal disinfection for tank B not
enabled.
Thermal disinfection tank C: Use this menu
option to switch the thermal disinfection of
the tank C on or off.
Yes: Thermal disinfection active The pump
(PE) is activated using the settings on the
menu Thermal disinfection
(Æ section 6.3.6 on page 48) and the
entire tank volume is warmed up to the
temperature required for thermal
disinfection. During the thermal
disinfection it is checked whether the
required temperature for the thermal
disinfection is reached at the bottom tank
temperature sensor (TC).
No: Thermal disinfection for tank C not
enabled.
PE: Therm disinfect pump mode: Use this
menu option to select the operating mode of
the pump (PE) for the thermal disinfection
process.
Auto: Automatically controlled operation
according to the set parameters.
Manual ON: Switches the pump
permanently on (e.g. for function test
when commissioning).
Manual OFF: Switches the pump
permanently off (e.g. for servicing work on
the pump without having to interrupt
heating operation).
For menu structure and adjustment ranges
Æ page 62.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 200 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 200

Bosch FW 200 Quick start guide - German - 2 pages

Bosch FW 200 Usermanual and installation guide - German - 84 pages

Bosch FW 200 Quick start guide - Dutch - 2 pages

Bosch FW 200 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info