458025
71
Zoom out
Zoom in
Previous page
1/112
Next page
6 720 643 256 (2010/05)
Menu settings INSTALLER SETTINGS (for installers only) | 71US/CA
Heating OFF until lower level reached: Use
this menu option to select the cooling down
phase for the Heating circuit 1 and/or
Heating circuit 2:
No: Heating mode corresponds to the
heating curve.
Yes: Heating mode corresponds to the
heating curve but without heating in the
cooling down phase. Only at the point
when the room temperature reaches the
required room temperature for the next
lower operating mode for the first time
(e.g. Economy with 59.0 °F (15.0 °C))
does the heating correspond to this
operating mode.
Heating OFF at outdoor temperature (Warm
weather shut down WWSD):
Use this menu option to set the outdoor
temperature for the Heating circuit 1 and/or
Heating circuit 2 at which the heating is to
switch off:
50 °F ... 77 °F (10 °C ...25 °C): Outdoor
temperature at which heating is turned off.
210 °F (99 °C): Function switched off, i. e.
the heating can switch on at any outdoor
temperature.
Risk of freezing at outdoor temperature: Use
this menu option to set the frost protection
threshold temperature at which the heating
for the Heating circuit 1 and/or Heating
circuit 2 is to switch on:
If the outdoor temperature exceeds the set frost
protection threshold temperature by 1.8 °F
(1 °C) and there is no heat demand then the
heating pump in the heating circuit switches off.
If the outdoor temperature does not
exceed the frost protection threshold
temperature then the heating pump in the
heating circuit switches on (system frost
protection).
Mixer run time: Use this menu option to set
the Mixer run time to the runtime of the mixer
motor used for Heating circuit 1 and/or
Heating circuit 2.
For menu structure and adjustment ranges
Æ page 58.
WARNING: Domestic hot water
pipework may freeze during longer
periods of outdoor temperatures
below 32 °F (0 °C), if the frost
protection threshold is set too low.
B The frost protection threshold
(37 °F (3 °C)) should only be
adjusted by an installer.
B Do not set the frost protection
level too low!
Damage caused by the frost
protection threshold being set
too low is not covered under
warranty.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 200 in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 200

Bosch FW 200 Quick start guide - German - 2 pages

Bosch FW 200 Usermanual and installation guide - German - 84 pages

Bosch FW 200 Quick start guide - Dutch - 2 pages

Bosch FW 200 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info