458024
61
Zoom out
Zoom in
Previous page
1/76
Next page
6 720 645 349 (2010/09)
Troubleshooting | 61
Fault 13
System configuration: BUS device changed
or replaced
Check system configuration for heating
circuit x and connections on IPM for
heating circuit x.
159 See display text.
1)
Fault 14
System configuration: incompatible BUS
device
DHW controlled by boiler. IPM control of
DHW has no effect.
117 See display text.
1)
Identify incompatible BUS
subscriber and remove from
system.
Fault 14
System configuration: incompatible BUS
device
IPM for cylinder must be set to
identification 3 or higher.
119 See display text.
1)
Fault 15
Outside temperature sensor not connected
Outside temperature is not available.
30 See display text.
1)
Check outside temperature
sensor and repair any lead
break.
Fault 19
Unable to save parameter settings
202 BUS subscriber configured but
not available at present.
Check system layout, check
system configuration, modify if
necessary and reset
parameter.
Fault 20
System configuration: invalid
193 Invalid code in remote control
for heating circuit.
In conjunction with FW 100
only code 1 is possible in the
remote control.
Fault 21
System configuration: new BUS device
135
137
139
See display text on remote control.
Fault 22
System configuration: BUS device missing
178
179
IPM not recognised on remote
control with code 1.
Check IPM connection and
code and adjust if required.
Fault 23
System configuration: BUS device changed
or replaced
159 System configuration on
remote control for heating
circuit 1 and IPM connections
for heating circuit 1 not
permissible.
Check system configuration for
heating circuit 1 and IPM
connections for heating
circuit 1.
Fault 24
System configuration: incompatible BUS
device
119 See display text on remote control.
Fault 28
Remote control is fitted on heat source
155 Remote control fitted inside
heating appliance.
Install remote control in living
space.
Information displayed
(Æ items 1, 3 and 4 in Fig. 25)
Text Code Cause Remedy (by contractor)
1) The display text is shown at the BUS subscriber (e.g. remote control) that has identified the fault. The other BUS
subscribers will instead display the code that corresponds to the display text.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 100 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 100

Bosch FW 100 User Manual - English - 40 pages

Bosch FW 100 Usermanual and installation guide - German - 76 pages

Bosch FW 100 Quick start guide - German - 2 pages

Bosch FW 100 Quick start guide - Dutch - 2 pages

Bosch FW 100 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info