458024
36
Zoom out
Zoom in
Previous page
1/76
Next page
6 720 645 349 (2010/09)
36 | Adjusting the MAIN MENU
6.4.4 Time program for DHW circulation pump
(only with DHW cylinder)
Menu: Domestic hot water > DHW circ pump
prog
Use this menu if you want to use a time program
for the DHW circulation pump.
The time program is only programmable and
active if Domestic hot water > DHW programme
> Separate programmes is set.
Automatic changeover between DHW
circulation pump On / Off in accordance with
the time program entered.
On: DHW circulation pump starts as per
setting (Æ chapter 6.4.5 on page 37).
Off: The DHW circulation pump is stopped.
Setting options
Up to six switching times per day with two
different operating modes (On / Off).
Optionally the same times or different times
for every day for All days / Mon - Fri / Sat +
Sun.
The shortest switching interval is 15 minutes
(= 1 segment).
Setting switching times and the operating mode
Enter or view days of the week, switching times
and associated operating modes (On / Off), as
described in chapter 6.3 on page 32.
6.4.5 Parameters for DHW
Menu: Domestic hot water > Parameter >
Cylinder temp at heating level Comf.
This menu point is only active if Domestic hot
water > DHW programme > As heating
programme is set (Æ chapter 6.4.1 on page 34).
This is where you set the required DHW
temperature for your DHW cylinder.
Menu: Domestic hot water > Parameter >
Cylinder temp at heating level Eco
This menu point is only active if Domestic hot
water > DHW programme > As heating
programme is set (Æ chapter 6.4.1 on page 34).
This is where you set the required reduced DHW
temperature for your DHW cylinder.
Menu: Domestic hot water > Parameter > DHW
priority
This menu point is only active if Domestic hot
water configuration in the system configuration
has been set to Cyl on IPM ident.3...10
(Æ chapter 8.1.1 on page 43). Use this menu if
your heating is to be left operational during
cylinder heating (e.g. for buildings with limited
insulation and low outdoor temperatures).
Priority: Central heating stops during cylinder
heating. The pump stands still and the mixer is
closed.
Conditional priority: If a mixer is installed,
central heating continues during cylinder
heating ; the pump runs and the mixer
regulates to the required heating
temperature. If no mixer is installed, central
heating will be switched off to prevent rooms
getting too hot. Cylinder heating takes longer
with Conditional priority.
Disable switching points that are
not required by deleting them.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FW 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FW 100 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FW 100

Bosch FW 100 User Manual - English - 40 pages

Bosch FW 100 Usermanual and installation guide - German - 76 pages

Bosch FW 100 Quick start guide - German - 2 pages

Bosch FW 100 Quick start guide - Dutch - 2 pages

Bosch FW 100 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info