458018
22
Zoom out
Zoom in
Previous page
1/88
Next page
6 720 645 347 (2010/09)
22 | Operation
Off: the built-in plate heat exchanger in the
heating appliance is not kept constantly
hot (eco mode); as a result energy is saved.
In eco mode, the hot tap has to be run for
a short while before the water becomes
hot.
If the DHW cylinder and FR 100 are directly
connected to the heating appliance, the DHW
program switches between the following
operating modes:
On: Cylinder heating enabled (temperature
in accordance with setting on heating
appliance).
Off: Cylinder heating blocked.
With appliances connected to a DHW cylinder
and FR 110, the DHW program specifies the
required water temperature (set
temperature).
If the temperature measured in the DHW
cylinder is below the set temperature, the
cylinder is reheated.
Once the set temperature is reached (or
exceeded), cylinder reheating is stopped.
DHW circulation program
The DHW circulation program specifies when a
connected DHW circulation pump for domestic
hot water runs.
5.2 Setting programs
5.2.1 Display views and menu navigation
The user interface of the FR 100 / FR 110 room
temperature-dependent heating controller is
implemented as a so-called "menu". Within that
menu, the various functions are arranged in a
hierarchical structure. For greater clarity, the
menu is subdivided into three sections (MAIN
MENU, INFO, INSTALLER SETTINGS). Each
section can be accessed by its own button. The
entire menu structure is shown in tabular form in
chapters 6.1, 7 and 8.1.
To navigate through the menu:
Press to open MAIN MENU. From any
point within the MAIN MENU, press to
go back to the standard display.
Press to open the INFO menu. From any
point within the INFO menu, press to go
back to the standard display.
Hold down for at least 3 seconds to open
the INSTALLER SETTINGS menu. From any
point within the INSTALLER SETTINGS menu,
press to go back to the standard display.
The selected menu point/parameter is
displayed in colours, i.e. white on
black.
Arrows in the left margin indicate that there is
more information than can be shown on the
display at once. It can be viewed with .
opens the submenu associated with the
selected menu point/parameter or activates
editing mode for the parameter (the
parameter setting starts flashing).
If the DHW program changes from a
higher to a lower temperature, the
water in the cylinder will not
immediately cool to the lower
temperature, i.e. water at a higher
temperature will continue to be
available for some time. However,
the cylinder will not be reheated
until the temperature falls below
the new set temperature.
The functions of the controls and the
meanings of the symbols on the
display are explained on pages 2
and 3.
menu
menu
info
info
menu
menu
inverse
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FR 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FR 110 in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FR 110

Bosch FR 110 User Manual - German - 40 pages

Bosch FR 110 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info