458017
18
Zoom out
Zoom in
Previous page
1/88
Next page
6 720 645 347 (2010/09)
18 | Commissioning (contractors only)
4 Commissioning (contractors only)
For correct commissioning, it is essential that the
following steps are carried out in the order
shown.
1. Set the DIP switch on IPM 1 and IPM 2 in
accordance with the details in the instructions
supplied.
2. Switch the system ON.
3. Program additional room temperature
controllers FR 10 (not permissible in
Germany) or FR 100 in accordance with the
details in the manual supplied.
4. When commissioning for the first time or after
a complete reset (all settings have been
reset), you need to select the display
language:
Turn to select the language and press
to confirm. (For how to change the
language Æ chapter 6.4.4 on page 49.)
5. If the power reserve has run out, set the time
and date as follows:
Turn to select the hour and press
to confirm.
Turn to select the minutes and press
to confirm.
Turn to select the year and press
to confirm.
Turn to select the month and press
to confirm.
Turn to select the day and press
to confirm. (For how to change the date
and time Æ chapter 6.4.1 on page 49.)
6. Set the code for the heating circuit (only
FR 100 with BUS connection)
If the controller is to control heating circuit
HC
1
and DHW heating: Identification CH
circuit select code 1 with and
confirm with .
If the controller is to control heating circuit
HC
2...10
:
Identification CH circuit with select
a code between 2 and 10and confirm with
.
7. During commissioning, automatic system
configuration starts immediately after entry of
the date and time.
Wait for 60 seconds and then follow the
instructions displayed.
If automatic system configuration does not
start of its own accord, start it from the
menu Æ chapter 8.2 on page 58.
8. Switch off automatic Auto switch between
GMT - BST Æ chapter 6.4.1 from page 49
9. Adjust other settings to suit the current
system, Æ chapter 6 starting on page 30 and
chapter 8 starting on page 54.
10. Fill and vent the solar thermal system
according to its documentation and prepare it
for commissioning as described in chapter 8.4
on page 60.
11. Adjust other settings to suit the current solar
thermal system, Æ chapter 8.5 starting on
page 60.
12. Commission the solar thermal system,
Æ chapter 8.5.1 on page 61.
The functions of the controls and
the meanings of the symbols on the
display are explained on pages 2
and 3.
Only one FR 100 or FR 10 can be
assigned per heating circuit and per
code (not permissible in Germany).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch FR 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch FR 100 in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch FR 100

Bosch FR 100 User Manual - German - 40 pages

Bosch FR 100 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info