766844
16
Zoom out
Zoom in
Previous page
1/263
Next page
16 | English
Connect the hose (4) to the water outlet (9) and the spray
gun (18) (see figure F).
Select the desired spray pattern by rotating the nozzle head
(1) (see figure I).
Select the desired jet strength with the pressure selector
(12) (see figure H).
Press the On/Off switch (13) and pull and hold the trigger
(2) until water comes out (see figure G).
Note: It can take up to 10 seconds for water to come out
when the product is first used after the water tank has been
emptied.
Autostop Function
The machine is designed to switch off the motor as soon as
the spray-gun trigger (2) is released.
Auto-off Function
The motor switches off when the product runs continuously
for 30 minutes.
Autosleep Function
The machine automatically switches off after 5 minutes
without operation.
Mounting/dismounting the brush (see figure J)
The brush (5) mounts onto the spray gun and makes clean-
ing more effective.
Slide the brush straight onto the spray gun (18). Guide the
upper and bottom clip of the brush into the corresponding
openings on the spray gun.
Remove the brush by pressing the bottom clip upward and
pulling the brush off the spray gun.
Troubleshooting
Cordless pressure cleaner
Problem Possible Cause Corrective Measure
Machine does not
power up Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Machine frozen Wait until machine has defrosted
Pressure pulsating Blocked nozzle Clean nozzle
Air in pump Operate machine in turbo-pressure mode with
nozzle set to shower jet until system is air-free
Motor running but no
or limited working
pressure
Water tank empty Refill water tank
Pump not vented Press and hold trigger to vent air
Power indication lights
up but pump no longer
running
The auto-off function has been activated Switch machine off and then on again
Machine switches off The autosleep function has been activated Press On/Off switch for activation
Battery discharged Recharge battery
Water leaks from ma-
chine Leaking pump Slight water leaks are possible; in case of excess-
ive leaks, contact Bosch Service Centre
Leaking connections Check if connections are properly mounted
Filler cap untight Check if filler cap is properly closed
Motor starts in standby
mode Pump, spray gun or hose leaking In case of continuous malfunctions in standby
mode, contact Bosch Service Centre
Hose cannot be re-
moved When machine is still switched on, pressure in
system increases the required force to remove
connectors
Switch machine off, then pull trigger to release
the pressure
Tank is not being filled,
although the tap water
is connected
Water hose and/or hose connection is clogged or
blocked Switch machine off, check and clean water hose
or hose connection
Battery and charger
F 016 L94 184 | (10.12.2020) Bosch Power Tools
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Fontus 18V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Fontus 18V in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info