Manual Bosch EU 2 D (page 12 of 36) (English, German, Dutch, Danish)

743487

Zoom out

Zoom in

1/36

EU 2 D

English

2.3 Heating Boilers (Fig. 5)

– Remove the cover of the control

panel.

– Remove the dummy panel (b).

– Push the timer (d) from the front

into the opening (a) until it clicks.

– Unscrew the screws of the switch

box cover (e) and remove the cov-

er.

– Route the connection cable (c)

from the rear to the switch box and

connect the plug (i) to the con-

tacts (j) on the main circuit board

(ST 2).

– Replace the switch box cover (e)

and screw on.

– Attach the cover of the control

panel.

. . . . . . . . . . . . . . . . . .

3 Setting

The timer has separate channels for

heating operation (ch 1) and water

heating/comfort mode operation

(ch 2).

Four switching periods (2 channels

with 2 switching periods each) can

be programmed per day.

3.1 Basic Program

The timer has a “built-in” basic pro-

gram for all days. For all four switch-

ing periods this is:

• Start of normal operation:

06.00 hrs.

• Start of reduced operation:

22.00 hrs.

3.2 Operating Elements

and Indicators

3.2.1 Setting Buttons for the

Switching Periods

Each switching period is set with

buttons arranged in pairs with the ●

(normal operation) buttons above

and the ❍ (reduced operation) be-

low.

3.2.2 Program Step Display

• A programmed switching period is

indicated with two vertical bars:

Left: Start of normal operation

Right: Start of reduced operation

• An active switching period is indi-

cated with horizontal lines.

• Deleted switching periods are not

displayed.

Example:

• Period I already completed, II ac-

tive.

Channel 1 operates in normal

mode.

• Period III not active, IV not pro-

grammed.

Channel 2 operates in re-

duced/frost protection mode.

Reduced

operation

Normal

operation

I II III IV

Channel 1 Channel 2

Switching periods

I II III IV

Channel 1 Channel 2

Program step

display

Switching periods

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EU 2 D in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EU 2 D Manual

Product: