780140

Bosch eShift - 2021 Manual

22
Zoom out
Zoom in
Previous page
1/277
Next page
English – 8
eShift with enviolo automatic+
(NuVinci optimized)
The optimum gear for each speed is automatically engaged
via a predefined desired cadence. You can choose between
multiple gears in manual mode.
eShift with the Intuvia on-board computer
In the <±NuVinci Cadence> mode, you can use the – or +
button on the operating unit to increase or decrease the de-
sired cadence. If you hold down the – or + button, the ca-
dence will increase or decrease in increments of five. The
desired cadence is shown on the display.
In the <±NuVinci Gear> mode, you can use the – or + but-
ton on the operating unit to switch back and forth between
multiple defined transmission ratios. The engaged transmis-
sion ratio (gear) is shown on the display.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
...
<Gear calibration→>: You can calibrate the continuously
variable transmission here. Confirm the calibration by press-
ing the bike light button. Then follow the instructions. In the
event of an error, it may also be necessary to perform calib-
ration when riding. In this case too, confirm the calibration
by pressing the bike light button and then follow the instruc-
tions on the display. This menu item is displayed only when
the on-board computer is in the holder.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
...
<±NuVinci Cadence>/<±NuVinci Gear>: Press and hold
the "i" button for longer than one second to access the Nu-
Vinci menu item from any menu item in the information
menu.
To switch from the <±NuVinci Cadence> mode to the
<±NuVinci Gear> mode, press and hold the "i" button for
one second.
To switch from the <±NuVinci Gear> mode to the
<±NuVinci Cadence> mode, briefly press the "i" button.
The default setting is <±NuVinci Cadence>.
Range Odometer NuVinci Cadence
(1 s)
(1 s)
NuVinci Gear
...
eShift with the Nyon on-board computer
The optimum gear for each speed is automatically engaged
via a predefined desired cadence. You can choose between
multiple gears in manual mode.
In the <Cadence Control> mode, you can use the – or + but-
ton on the operating unit to increase or decrease the desired
cadence. If you hold down the – or + button, the cadence
will increase or decrease in increments of five. The desired
cadence is shown on the display.
In the <Gear Control> mode, you can use the – or + button
on the operating unit to switch back and forth between mul-
tiple defined transmission ratios. The engaged gear is shown
on the display.
Under <Gear calibration>, you can calibrate the continu-
ously variable transmission. Then follow the instructions on
the display.
In the event of an error, it may also be necessary to perform
calibration when riding. Confirm the calibration here too,
and follow the instructions on the display.
0 275 007 XES | (17.04.2020) Bosch eBike Systems
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch eShift - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch eShift - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info