780140

Bosch eShift - 2021 Manual

16
Zoom out
Zoom in
Previous page
1/277
Next page
English – 2
eShift with Shimano Di2 automatic
hub gears
You can operate the automatic Shimano Di2 hub gears in
manual or automatic mode.
Use the Shimano gearstick to shift gears in manual mode. In
automatic mode, the gear shifting system shifts gear auto-
matically as a function of the speed, the force you exert on
the pedals, and the cadence.
The change from automatic mode to manual mode (depend-
ing on the gearstick you use) is described in the operating in-
structions for your gearing.
If you use the gearstick in automatic mode, the gear shifting
system shifts to the next gear but remains in automatic
mode.
Manual gear shifting operations in automatic mode have a
long-term impact on the gear shifting behaviour of your gear
shifting system and adapt the gear shifting operations to
your cycling behaviour (adaptive system).
When the system is switched on for the first time with a new
wheel which has not been used before, the gears are firstly
calibrated. For this purpose, the automatic system shifts to
the highest/lowest gear during the first trip and then shifts
through all gears once.
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
...
<– Start gear +>: The starting gear can be set here. The
automatic shift-back function is switched off in the – – posi-
tion. This menu item is displayed only when the on-board
computer is in the holder.
<Gear adjustment>: This menu item can be used to per-
form fine adjustment of the Shimano Di2. The pre-defined
setting range can be found in the operating instructions
provided by the gearing manufacturer. Perform fine adjust-
ment as soon as you hear the gearing make unusual noises.
This menu item is displayed only when the on-board com-
puter is in the holder.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
...
<Auto: on>/<Auto: off>: This menu item indicates whether
automatic mode is switched on or off.
...
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift
field is not visible (e.g. in settings). An A appears next to the
gear display in automatic mode.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set under <My
eBike>→ <eShift>.
You can carry out fine adjustment of the Shimano Di2 under
<Gear adjustment>. The pre-defined setting range can be
found in the operating instructions provided by the gearing
manufacturer. Perform fine adjustment as soon as you hear
the gearing make unusual noises.
eShift with the Kiox on-board computer
The gear and switching mode (manual M/automatic A) are
always displayed on the start page. If you are on another
screen, the gear will be briefly shown on the display each
time it is changed.
0 275 007 XES | (17.04.2020) Bosch eBike Systems
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch eShift - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch eShift - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info