708037

Bosch EasyImpact 5500 Manual

18
Zoom out
Zoom in
Previous page
1/111
Next page
18 | English
1 609 92A 29Y | (5.8.16) Bosch Power Tools
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Assembly
Before any work on the machine itself, pull the mains
plug.
Auxiliary Handle (see figure A)
Operate your machine only with the auxiliary handle 9.
Before any work, make sure that the wing bolt 21/18 is
tightened. Loss of control can cause personal injury.
Turn the wing bolt 21/18 counterclockwise and guide the
auxiliary handle 9 over the drill chuck onto the spindle collar
of the power tool.
You can swivel the auxiliary handle 9 in order to achieve a safe
work posture that minimises your fatigue.
Swivel the auxiliary handle 9 to the required position and
retighten the wing bolt 21/18 in clockwise direction.
Adjusting the Drilling Depth (see figureB)
The required drilling depth X can be set with the depth stop
23.
Press the button for depth stop adjustment 22 and insert the
depth stop into the auxiliary handle 9.
The knurled surface of the depth stop 23 must face down-
ward.
Pull out the depth stop until the distance between the tip of
the drill bit and the tip of the depth stop corresponds with the
desired drilling depth X.
Drill Assistant
Attaching the Drill Assistant (see figures C–D)
The Drill Assistant 10 can be used with and without dust col-
lection device 13. Use of the dust collection device 13 is lim-
ited to drill bits with a diameter of 12 mm and a length of
120 mm.
Attach the dust collection device 13 to the mounting 26.
Press the unlocking button 8 to release the Drill Assistant 10
from its parked position.
Guide the Drill Assistant 10 over the drill chuck onto the spin-
dle collar of the power tool.
Lock it by turning the wing bolt 18 in clockwise direction.
Adjusting the Drilling Depth (see figures E – F)
Mount the drill bit (see section “Changing the Tool”).
You can use the setting ring 17 to set the required drilling
depth X.
Unlock the setting ring 17 by turning it to the left . Place
the dust box 11 or the mounting 26 flush against the wall or
workpiece. Move the tip of the drill bit to the wall or work-
piece.
EasyImpact
5500
EasyImpact
570
EasyImpact
5700
EasyImpact
6000
Typically the A-weighted noise levels of the
product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB(A)
96
107
3
97
108
3
97
108
3
97
108
3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to
EN 60745-2-1:
Drilling in metal:
a
h
K
m/s
2
m/s
2
7.5
1.5
6.5
1.5
6.5
1.5
6.5
1.5
Impact drilling in concrete:
a
h
K
m/s
2
m/s
2
32
4.0
28
2.0
28
2.0
28
2.0
Screwdriving:
a
h
K
m/s
2
m/s
2
<2.5
1.5
<2.5
1.5
<2.5
1.5
<2.5
1.5
OBJ_BUCH-2824-001.book Page 18 Friday, August 5, 2016 1:28 PM
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyImpact 5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyImpact 5500 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info