Manual Bosch EasyHedgeCut 55 (page 11 of 192) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

777043

Zoom out

Zoom in

1/192

English | 11

uTo safeguard against contact with the moving cutter

blade, this hedge trimmer is constructed with two

handles each with a blade control (switch). To operate

the hedge trimmer, both controls must be actuated simul-

taneously. Do not use the tool, if it runs without a

switch being actuated or just one switch being actu-

ated.

Electrical Safety

Warning: Switch off, remove plug from

mains before adjusting, cleaning or if cable

is cut, damaged or entangled.

Your machine is double insulated for safety and requires no

earth connection. The operating voltage is 230VAC, 50Hz

(for non-EU countries 220V, 240V 50Hz) Contact your

Bosch Service Centre for details. If in doubt contact a quali-

fied electrician or the nearest Bosch Service Centre.

For increased electrical safety use a Residual Current Device

(RCD) with a tripping current of not more than 30mA. Al-

ways check your RCD every time you use it.

Keep the supply cables away from moving hazardous parts

and avoid damage to the cables; this can lead to contact with

live parts.

The connections (plugs and sockets) should be kept dry and

off the ground.

The supply cables must be inspected for signs of damage at

regular intervals and may only be used if in perfect condi-

tion.

If the supply cable on the product is damaged, it must only

be replaced by a Bosch Service Centre. Only use approved

extension cables.

Use only extension cords, cables, leads, cable reels that

comply with EN 61242/IEC 61242 or IEC 60884-2-7.

If you want to use an extension cable when operating your

product, only the following cable dimensions should be

used:

– Nominal conductor area of 1.25mm2 or 1.5mm2

– Maximum length 30m for a Cord Extension Set or max-

imum length of 60m for a Cable Reel with Residual Cur-

rent Device (RCD).

Note: If an extension cable is used it must be earthed and

connected through the plug to the earth cable of your supply

network in accordance with prescribed safety regulations.

WARNING! Inadequate extension cables can

be dangerous. Extension cable, plug and

socket must be of watertight construction

and intended for outdoor use.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

uProducts that are only sold in AUS and NZ: Use a resid-

ual current device (RCD) with a nominal residual current

of 30 mA or less.

Symbols

The following symbols are important for reading and under-

standing the original instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the product in a better and safer

manner.

Symbol Meaning

Wear protective gloves

Wear safety glasses/goggles

Movement direction

Reaction direction

Weight

Switching On

Switching Off

CLICK!

Audible noise

Prohibited action

Accessories/Spare Parts

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the safety warnings and

instructions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the ending of this operat-

ing manual.

Intended Use

The machine is intended for cutting and trimming hedges

and bushes in domestic use.

Product features (see figures A and B)

The numbering of the product features refers to the illustra-

tion of the product on the graphics pages.

Bosch Power Tools F 016 L94 104 | (28.09.2020)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyHedgeCut 55 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 3.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyHedgeCut 55 Manual

Product: