708230
18
Zoom out
Zoom in
Previous page
1/286
Next page
18 | English
Troubleshooting
Hedgecutter
Problem Possible Cause Corrective Action
Hedgecutter does not
operate
Battery discharged Recharge battery; also see “Battery Charging”
Battery not fully connected Ensure both locking levels are engaged
Hedgecutter operates
intermittently
Internal wiring of garden tool defective Contact Service Agent
On/Off switch defective Contact Service Agent
Motor reverses repeatedly then stops after 3s. see “Working Advice” (Anti Blocking)
Motor runs but blades
remain stationary
Internal Error Contact Service Agent
Cutting blade hot Cutting blade blunt Have blade sharpened
Cutting blade has dents Have blade inspected/overhauled
Too much friction, due to lack of lubricant Apply lubricant spray
Blade will not move Battery discharged Recharge battery; also see “Battery Charging”
Machine defective Contact Service Agent
Excessive vibrations/
noise
Machine defective Contact Service Agent
Cutting time per bat-
tery charge too low
Too much friction, due to lack of lubricant Apply lubricant spray
Blade needs cleaning Clean blade
Poor cutting technique
see “Working Advice” (figureE)
Battery not fully charged Recharge battery; also see “Battery Charging”
The blades are running
slow or the anti block-
ing feature is not func-
tioning
Battery discharged Recharge battery; also see “Battery Charging”
Battery stored outside of battery temperature Allow battery to warm naturally to room temperat-
ure (within battery operating temperature 0–
45°C)
Battery and charger
Problem Possible Cause Corrective Action
Flashing red battery
charge indicator
No charging procedure
possible
Battery not (properly) inserted Properly insert battery in charger
Battery contacts contaminated Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Battery defective Replace the battery
Battery charge indicat-
ors do not light up
Mains plug of battery charger not plugged in
(properly)
Insert mains plug (fully) into the socket outlet
Socket outlet, mains cable or battery charger de-
fective
Check the mains voltage; have the battery char-
ger checked by an authorised after-sales service
agent for Bosch power tools
Maintenance and Service
u Before any work on the garden product itself (e.g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the On/Off switch.
Maintenance, Cleaning and Storage (see figure
F)
u For safe and proper working, always keep the product
clean.
For safe and proper working, always keep the garden tool
and the ventilation slots clean.
F 016 L81 850 | (23.11.2018) Bosch Power Tools
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyHedgeCut 18-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyHedgeCut 18-45 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info