707791
15
Zoom out
Zoom in
Previous page
1/282
Next page
English | 15
Bosch Power Tools F 016 L81 736 | (23.5.17)
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
Do not cover the ventilation slots of the battery charg-
er. Otherwise, the battery charger can overheat and no
longer operate properly.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Maintenance
Remove battery before adjusting or cleaning, and be-
fore leaving the machine unattended for any period.Al-
ways wear gardening gloves when handling or working
near the sharp blades.
Examine the machine and replace worn or damaged parts
for safety.
Always lubricate the cutting blade with protective spray
before storage.
Keep all nuts, bolts and screws tight to be sure that the ma-
chine is in safe working condition.
Ensure replacement parts fitted are Bosch-approved.
Always lubricate the cutting blade with protective
spray before use.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Intended Use
The machine is intended for cutting and trimming hedges and
bushes in domestic use.
Technical Data
Symbol Meaning
Wear protective gloves
Wear eye protection.
Movement direction
Switching On
Switching Off
Permitted action
Prohibited action
Accessories
Cordless hedge trimmer EasyHedgeCut 12-35
EasyHedgeCut 12-350
EasyHedgeCut 12-351
EasyHedgeCut 12-45
EasyHedgeCut 12-450
Article number 3 600 H49 B.. 3 600 H49 A..
No-load stroke rate
min
-1
2400 2400
Cutting length
mm 350 450
Tooth opening
mm 15 15
Weight according to EPTA-Procedure 01:2014
kg 1.9 2.0
Serial number
See serial number (type plate) on the machine
Battery
Li-Ion Li-Ion
Article number
1 607 A35 05E 1 607 A35 05E
Rated voltage
V1212
Capacity
Ah 1.5 1.5
Number of battery cells
3 3
OBJ_BUCH-1685-008.book Page 15 Tuesday, May 23, 2017 2:11 PM
15


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-easyhedgecut-12-45

Reset search

  • The trimmer works for a few seconds then stops, new battery Submitted on 24-9-2021 at 15:09

    Reply Report abuse
  • The trimmer has stopped working, replaced battery, still no good. Any ideas? Submitted on 24-9-2021 at 15:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch EasyHedgeCut 12-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyHedgeCut 12-45 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info