Manual Bosch EasyGrassCut 23 (page 21 of 340) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708201

Zoom out

Zoom in

1/340

English | 21

Assembly

u Caution: Switch the garden tool off and pull the mains

plug before performing any maintenance.

Connect shaft (see figures C and D)

Note: A connected shaft can no longer be dismounted.

Remove the transport safety (7).

Connect the individual parts of the shaft until they can be

heard to engage.

Mounting and adjusting the handle (see figure E)

The handle (1) can be set to different positions. To change

the adjustment, press buttons (5) and move the handle to

the desired position. Release the buttons (5) again so that

the handle can engage.

Mounting the protection guard (see figure F)

Position the protection guard (6) on the trimmer head and

fasten it with the provided screw.

Operation

u Pay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the machine.

u Caution: Switch the garden tool off and pull the mains

plug before adjusting or cleaning.

u The cutting line continues to rotate for a few seconds

after the trimmer is switched off. Allow the motor/cut-

ting line to stop rotating before switching on again.

u Do not briefly switch off and on again several times in

a row.

u Only use Bosch approved cutting elements. Cutting

performance will vary with different cutting elements.

Switching On and Off (see figure G)

To switch on, firstly press the lock-off button (2). Then

press the On/Off switch (3) and keep it pressed.

To switch off, release the On/Off switch (3).

Dismounting the spool, winding up the cutting

line and mounting the spool (see figures J to H)

u Remove the mains plug before replacing the spool.

Press both latches of the spool cover together and remove

the spool cover (9). Afterwards, remove the empty spool

(10).

Cut off approx. 4.0 m line from the refill roll. Slide one end of

the cutting line into the hole for line wind-up (11) in the

spool and wind up the cutting line uniformly and tightly.

Slide the other end of the cutting line through the hole for

line guiding (12) in the trimmer head and mount the spool

back into the trimmer head. Affix the spool by mounting the

spool cover .

Line Feeding (see figure K)

Semi-automatic Line Feeding

The trimmer is equipped with a semi-automatic feeding sys-

tem. The system feeds 10mm of the line with every press of

the on/off switch (3).

Manual Line Feeding

Press the line-feed button (13), and pull the cutting line out

to the desired length.

Troubleshooting

Problem Possible Cause Corrective Action

Motor refuses to start Power turned off Turn power on

Mains socket faulty Use another socket

Extension cable damaged Inspect cable, replace if damaged

Fuse faulty / blown Replace fuse

Garden tool functions

intermittently

Extension cable damaged Inspect cable, replace if damaged

Internal wiring of garden tool defective Contact Bosch customer service agent

Garden product la-

bours

Grass too high Cut in stages

Garden tool does not

cut

Cutting line too short/broken off Manually feed cutting line

Spool empty Replace line spool

Cutting line can no

longer be fed

Line inside the spool entangled Inspect the spool, rewind if necessary

Spool empty Refill line spool

Bosch Power Tools F 016 L81 799 | (24.10.2018)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyGrassCut 23 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyGrassCut 23 Manual

Product: