Manual Bosch EasyAquatak 120 (page 12 of 282) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708247

Zoom out

Zoom in

1/282

12 | English

F 016 L81 747 | (7.8.17) Bosch Power Tools

We recommend that this equipment

is only connected into a socket which

is protected by a circuit-breaker that

would be actuated by a 30 mA residu-

al current.

Remove the plug from socket when-

ever the machine is left unattended

for any period.

The electric supply installation

should comply with IEC 60364-1.

If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualified

persons in order to avoid a hazard.

If the plug is damaged, pay attention

to the following:

Plugs and sockets situated near the

work site or outdoors should be to

class IP 55 of BS 5490 to provide ad-

equate protection against ingress of

water, etc. and cable entries require

effective sealing. Rubber shrouds

should be provided over cable

glands. Drip-proof (class IP X2 of

BS 5490) plugs and sockets to

BS 4343 are suitable for use indoors

where the plug is away from the water

spray area where the appliance is in

use.

Never touch the mains plug with wet

hands.

Do not pull plug while operating the

device.

Do not run over, crush or pull the

power supply cord or extension cord,

otherwise it may be damaged. Pro-

tect the cable from heat, oil and sharp

edges.

Do not use the unit, if the power sup-

ply cord or important parts, e. g.

high-pressure hose, power gun or

safety devices are damaged.

Warning: Inadequate extension cords

can be dangerous.

If an extension cord is used, the plug

and socket must be of watertight con-

struction. The extension cord must

have a cross section in accordance

with the operating instructions and

be protected against splashed water.

The connection must not be in water.

When replacing plugs on the power

supply cable or extension lead the

spray water guard and mechanical

stability must remain intact.

Water connection

Comply with the regulations of your

water supply company.

All connecting hoses must have prop-

erly sealed joints.

Make sure that the supply hose is at

least 12.7 mm (1/2") in diameter and

is reinforced.

The appliance should never be used

on the drinking water supply without

a back flow valve. Water which has

passed the back flow valve is regard-

ed as undrinkable.

The high-pressure hose must not be

damaged (danger of bursting). A

damaged high-pressure hose must be

replaced immediately. Only use hos-

es and connections recommended by

the manufacturer.

High-pressure hoses, fittings and

couplings are important for the safety

of the appliance. Use only hoses, fit-

tings and couplings recommended by

the manufacturer.

OBJ_BUCH-2949-002.book Page 12 Monday, August 7, 2017 2:55 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyAquatak 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyAquatak 120 Manual

Product: