Manual Bosch EasyAquatak 100 (page 11 of 262) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

708245

Zoom out

Zoom in

1/262

English | 11

Bosch Power Tools F 016 L81 745 | (26.10.17)

English

Safety Notes

Explanation of symbols

General hazard safety alert.

Never direct the water jet

at people, animals, the unit

or electric components.

Warning: High pressure jets can be dan-

gerous if subject to misuse.

According to the applicable

regulations, the appliance

must never be used on the

drinking water network without a

system separator. Use a separator as

per IEC 61770 Type BA.

Water flowing though a system sepa-

rator is considered not drinkable.

Safety Notes for pressure washer

Read all safety warnings

and all instructions. Failure

to follow the warnings and in-

structions may result in electric shock,

fire and/or serious injury.

The warning and information signs

attached to the unit provide impor-

tant information for safe operation.

Apart from the information in the op-

erating instructions comply with the

general safety regulations and regu-

lations for the prevention of acci-

dents.

Connecting to the mains

The voltage indicated on the rating

plate must correspond to the voltage

of the power source.

We recommend that this equipment

is only connected into a socket which

is protected by a circuit-breaker that

would be actuated by a 30 mA residu-

al current.

Remove the plug from socket when-

ever the machine is left unattended

for any period.

The electric supply installation

should comply with IEC 60364-1.

If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly qualified

persons in order to avoid a hazard.

If the plug is damaged, pay attention

to the following:

Plugs and sockets situated near the

work site or outdoors should be to

class IP 55 of BS 5490 to provide ad-

equate protection against ingress of

water, etc. and cable entries require

effective sealing. Rubber shrouds

should be provided over cable

glands. Drip-proof (class IP X2 of

BS 5490) plugs and sockets to

BS 4343 are suitable for use indoors

where the plug is away from the water

spray area where the appliance is in

use.

Never touch the mains plug with wet

hands.

Do not pull plug while operating the

device.

Do not run over, crush or pull the

power supply cord or extension cord,

otherwise it may be damaged. Pro-

tect the cable from heat, oil and sharp

edges.

Do not use the unit, if the power sup-

ply cord or important parts, e. g.

OBJ_BUCH-3244-001.book Page 11 Thursday, October 26, 2017 10:08 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch EasyAquatak 100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch EasyAquatak 100 Manual

Product: