765854
12
Zoom out
Zoom in
Previous page
1/109
Next page
12 | English
Cordless dry vacuum cleaner EasyVac 12
Recommended chargers AL11..
GAL 12..
GAL 12V-...
A) Limited performance at temperatures <0°C
Technical data determined using the battery that comes with the
product.
Assembly
Battery Charging
uUse only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the Electronic Cell Protection (ECP). A protective circuit
switches the cordless dust extractor off when the battery is
drained.
uDo not continue to press the on/off switch after the
tool has been automatically switched off. This can
damage the battery.
The battery must be removed from the vacuum cleaner to
charge it.
The battery features NTC temperature monitoring, which
only permits charging in a temperature range between 0 °C
and 45 °C. This achieves a long battery life.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Battery charge indicator
The three green LEDs of the battery charge indicator(3) in-
dicate the state of charge of the battery(4). The battery
charge indicator only illuminates for three seconds after
start-up.
LED Capacity
Continuous lighting 3 x green ≥ 2/3
Continuous lighting 2 x green ≥ 1/3
Continuous lighting 1 x green < 1/3
Flashing light 3 x green Reserve
If no LED lights up after switching on, the battery is defective
and must be replaced.
Inserting and removing the battery (seefiguresA1 – A2)
uDo not use force to insert the battery. The battery is de-
signed in such a way that it can only be inserted into the
vacuum cleaner when it is in the right position.
Slide the battery(4) all the way into the battery bay(12).
To remove the battery(4), press the release buttons(13)
on the battery and pull it out of the battery bay(12).
Fitting the vacuum cleaner accessories
(seefigureB)
uRemove the battery before cleaning or performing
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
The vacuum cleaner accessories can be directly connected
with the dust container(6).
See the illustration for the different ways of combining the
vacuum cleaner accessories.
Insert the individual vacuum cleaner accessories firmly
into the connection on the dust container(6) and into one
another.
Operation
uRemove the battery before cleaning or performing
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
Starting Operation
uBefore extraction, ensure that the filter unit is se-
curely fitted.
uDo not use damaged filters (e.g. no cracks, small
holes, etc.). Replace any damaged filters immedi-
ately.
Switching on/off
To switch on the vacuum cleaner, press the on/off but-
ton(2).
To switch off the vacuum cleaner, press the on/off but-
ton(2) again.
Maintenance and Service
Maintenance and Cleaning
uTo ensure safe and efficient operation, always keep
the dust extractor and the ventilation slots clean.
Clean the housing of the vacuum cleaner occasionally
with a damp cloth.
Clean dirty charging pins using a dry cloth.
uRemove the battery before cleaning or performing
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
1 609 92A 516 | (26.02.2019) Bosch Power Tools
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Easy Vac 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Easy Vac 12 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info