Manual Bosch DWP64CC20Z (page 9 of 12) (English)

746941

Zoom out

Zoom in

1/12

en Cleaning and maintenance

Cleaning the metal grease filter

Notes

■ Do not use any aggressive, acidic or alkaline

cleaning agents.

■ When cleaning the metal mesh grease filters, also

clean the holder for the metal mesh grease filters in

the appliance using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special grease solvent for

stubborn dirt. It can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy

solution.

■ Clean the filters with a brush and then rinse them

thoroughly.

■ Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has

no effect on the function of the metal mesh grease

filters.

■ Do not clean heavily soiled metal mesh grease filters

together with utensils.

■ Place the metal mesh grease filters loosely in the

dishwasher. The metal mesh grease filters must not

be wedged in.

Installing the metal mesh grease filter

1. Insert metal grease filter.

2. Fold up metal grease filter and engage the lock.

Note: Make sure that the filter lock engages properly.

Changing the activated charcoal filter (only in

circulating-air mode)

To ensure effective odour removal, the filters must be

serviced regularly.

The activated charcoal filters must be replaced at least

every 3 months.

Notes

■ The activated charcoal filters are not included with

the appliance. Activated charcoal filters are available

from specialist retailers, from our after-sales service

or from our online shop.

■ The activated charcoal filters cannot be cleaned or

reactivated.

1. Remove metal grease filter: See above.

2. Turn the old activated charcoal filter and pull away

from the bracket. ¨

3. Push the new activated charcoal filter onto the

bracket and turn. ©

4. Fit the metal grease filter: See above.

Trouble shooting en

3Trouble shooting

Tr oubl e shoot i ng

Malfunctions often have simple explanations. Please

read the following notes before calling the after-sales

service.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

--------

Replacing the LED lights

:Warning – Risk of electric shock!

When changing the bulbs, the bulb socket contacts are

live. Before changing the bulb, unplug the appliance

from the mains or switch off the circuit breaker in the

fuse box.

:Warning – Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than 100

seconds.

Important! Only use bulbs of the same type and

wattage.

1. Disconnect the appliance from the power supply.

2. Remove the bulb that is in the retaining clip from the

appliance.

3. Turn the bulb a quarter turn anti-clockwise and

remove it.

4. Replace the bulb with one of the same type.

5. Plug in the mains plug and switch the fuse back on.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged into the

mains

Connect the appliance to the

power supply

Power cut Check whether other kitchen

appliances are working

The fuse is faulty Check in the fuse box to make

sure that the fuse for the appli-

ance is in working order

The lighting does

not work.

The LED lights

are defective.

You can read about this in the

section entitled "Replacing the

LED lights".

'53$5*8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DWP64CC20Z in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch DWP64CC20Z Manual

Product: