611640
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Operating the appliance
These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel
Setting the fan
Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
1. Press the 1 button.
The fan starts at level 1.
2. Press the 1, 2, 3 or 4/G button to set another fan level.
The 0 button and the button for this fan level light up.
Switching off
Press the 0 button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
1. Press and hold the 4/G button while the ventilation system is
switched on.
The 0 button lights up and the 4/G button flashes once every
second. Intensive mode is activated.
2. Press and hold the 4/G button or press the 0 button.
Intensive mode is deactivated.
Note: The run time of the intensive mode is 6 minutes. Once
this time has elapsed, the appliance switches back to the fan
level that was previously set.
Interval ventilation
With interval ventilation, the ventilation system switches on
automatically for 10 minutes every hour. The appliance
switches off after 24 hours.
Note: If the intensive mode or fan run-on are activated, the
interval ventilation is not available.
1. Press the H button.
The 0 and H buttons light up. The interval ventilation is
switched on. The fan starts at level 1.
2. Press the H button or the 0 button.
The interval ventilation is switched off.
Fan run-on time
Note: If the intensive mode is activated, fan run-on is not
available.
1. Select the fan level.
2. Press the y button.
The 0 and y buttons light up. The fan continues to run at this
fan level for 15 minutes and then switches off automatically
once this time has elapsed. If the lighting is switched on, this
is also switched off once the run-on time has elapsed.
3. Press the y button or the 0 button.
The fan run-on ends before the remaining run-on time has
elapsed.
Lighting
The lighting can be switched on and off independently of the
ventilation system.
Press the B button.
The B button lights up.
Setting the brightness
1. Press and hold the B button for 2 seconds.
The brightness is reduced.
2. Press the B button.
The maximum brightness is restored.
Saturation display
When the metal grease filters or the activated charcoal filters
are saturated, the corresponding symbol flashes:
Metal grease filter: H
Metal grease filter and activated charcoal filter: y
When this happens, do not delay cleaning the metal grease
filters or replacing the activated charcoal filters any further; see
section Cleaning and maintenance.
Resetting the saturation displays
1. Switch off the motor and the lighting.
2. Press and hold the H button.
The 0 button flashes 3 times. The saturation indicator for the
metal grease filter and for the activated charcoal filter is reset.
Switching over the display for circulating-air mode
For air recirculation, the electronic control display must be
switched over accordingly:
1. Check whether the extractor hood is connected and switched
off.
2. Press and hold the 3 button until the 0 button flashes twice.
The electronic control is switched over to air recirculation.
Switching over the display for exhaust air mode
1. Check whether the extractor hood is connected and switched
off.
2. Press the 3 button until the 0 button flashes once.
The electronic control is switched over to air extraction.
Explanation
0 Switches off the fan
1 Switches on fan level 1
2 Switches on fan level 2
3 Switches on fan level 3
4/GSwitches on fan level 4 or intensive mode
HSwitches on interval ventilation
ySwitches on the fan run-on
BSwitches on the lighting
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DWK098G21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DWK098G21 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch DWK098G21

Bosch DWK098G21 User Manual - German - 12 pages

Bosch DWK098G21 User Manual - Dutch, French, Portuguese, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info