Manual Bosch DWK 063650 (page 20 of 52) (English, German, Dutch, French)

108258

Zoom out

Zoom in

1/52

Cleaning and care

Isolate the extractor hood by pulling out the

mains plug or switching off the fuse.

 When cleaning the grease ﬁ lters, remove

grease deposits from accessible parts of the

housing. This prevents the risk of ﬁ re and en-

sures that the extractor hood continues operat-

ing at maximum efﬁ ciency.

 Clean the extractor hood with a hot soap solu-

tion or a mild window cleaner.

 Do not scrape off dried-on dirt but wipe off with

a damp cloth.

 Do not use scouring agents or abrasive spong-

es.

 Note: Do not use alcohol (spirit) on plastic sur-

faces, as dull marks may appear.

Caution: Ensure that the kitchen is adequately

ventilated. Avoid naked ﬂ ames!

Clean the operating buttons with a mild soapy

solution and a soft, damp cloth only. Do not use

stainless-steel cleaner to clean the operating but-

tons.

Stainless steel surfaces:

 Use a mild non-abrasive stainless steel cleaner.

 Clean the surface in the same direction as it

has been ground and polished.

Do not use any of the following to clean stain-

less steel surfaces: abrasive sponges, cleaning

agents containing sand, soda, acid or chloride!

Aluminium and plastic surfaces:

 Use a soft, non-linting window cloth or micro-

ﬁ bre cloth.

 Do not use dry cloths.

 Use a mild window cleaning agent.

 Do not use aggressive, acidic or caustic clean-

ers.

 Do not use abrasive agents.

Replacing the light bulbs

1. Switch off the extractor hood and pull out the

mains plug or switch off the electricity supply at

the fuse box.

When switched on, the halogen bulbs become

very hot. Even for some time after the bulbs have

been switched off there is still a risk of burns.

2. With the aid of a screwdriver pull out the bulbs

or, if it is not easy, remove the 2 screws ﬁ xing

the Lighting support, and pull it out of from the

Hood.

3. Replace the halogen light bulb (conventional

halogen bulb, 12 Volt, max. 20 Watt, GU4 bulb-

holder).

Caution: Plug-in bulbholder.

4. Replace the Support, ﬁ xing it in place with the

two screws removed as above.

5. Restore the power by inserting the mains plug

or switching on the fuse.

Note: If the light does not function, check that the

bulbs have been inserted correctly.

If you encounter a problem

If you have any questions or if a fault occurs, please

call Customer Service.

(See list of Customer Service representatives).

When you call, please quote the following:

E-Nr. FD

Enter the relevant numbers into the box above. The

E-Nr. (product no.) and FD (production date) are

shown on the nameplate which can be seen inside

the extractor hood after the ﬁ lter frame has been

detached.

The manufacturer of the extractor hoods

accepts no liability for complaints which can

be attributed to the design and layout of the

pipework.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DWK 063650 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch DWK 063650 Manual

Product: