27
Operation
Fan
On/O
Fan settings Fan run-on Light
Intensive
setting
Grease lter saturation
display
Light
The light can be switched on and off
independently of the fan.
To adjust the luminosity, hold down the 0
button until the required luminosity is obtained.
Switching the acoustic signal o and on
When a button is pressed, an
acknowledgement signal sounds.
To switch off the acoustic signal,
simultaneously press the 0 and
p buttons for
approx. 3 seconds. An acknowledgement signal
sounds.
To switch on the acoustic signal, repeat the
process.
Locking the buttons
To lock the buttons, simultaneously press 0
and
q for approx. 3 seconds.
The buttons are locked for approx. 30 seconds.
To release the buttons early, repeat the
process.
Indirect lighting
ṇ RISK OF INJURY
Halogen bulbs become very hot when
switched on. Even some time after the
appliance has been switched o, there is still a
risk of burns!
Caution when pressing the switch for the
indirect lighting.
Do not touch the hot halogen bulbs!
1 The indirect lighting is on permanently.
0 O
2 The indirect lighting is switched on and o
together with the hotplate lighting.
