Manual Bosch DT20RF DIGISTAT (page 27 of 32) (English)

636456

Zoom out

Zoom in

1/32

DIGISTAT

INSTALLATION

DIGISTAT / DT20RF RECEIVER

TO CHECK PREVIOUSLY

INSTALLED UNIT

To check signal strength on previously

installed and paired units :

1. Press the ‘set’ button 4 times.

2. Press ‘OK’ once.

3. Press the ‘set’ button 5 times. The display will

show ‘SSI and OFF’.

4. Press the ‘+’ button so that the display shows

‘SSI, Antenna and ON’.

5. Press the ‘set’ button so the display shows ‘SSI

and Antenna’.

6. After a few seconds the display will show ‘---’.

7. Remove the batteries from the transmitter and wait

until the display has faded away.

8. Press and hold the SET button on the transmitter

while re-inserting the batteries and keep the

button depressed until the display shows ‘rF’ .

DT20RF PROGRAMMER

INSTRUCTION MANUAL

8 716 115 495a (02.2009)

OPERATING & INSTALLATION

INSTRUCTIONS

8_716_115_495a 9/2/09 11:49 Page 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DT20RF DIGISTAT in the language / languages: English as an attachment in your email.

The manual is 4,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch DT20RF DIGISTAT Manual

Product: