636455
16
Zoom out
Zoom in
Previous page
1/36
Next page
DIGISTAT
USER OPTIONS
Option select
On/Off
setting
Option 09 How to lock the key pad - Access Protection
Lock.
The access protection lock allows you to lock the Digistat
Optimiser so that it cannot have any adjustments.
The default is Off mode allowing you to adjust the Digistat.
1. To Lock the Digistat settings enter the user options by pressing
< and > simultaneously for 3 seconds.
2. Select option 09 by pressing > until 09 appears.
3. Use + or – keys to select On.
Press > to accept.
Once the User Options Menu is exited all buttons will be
locked.
4. To switch off the Protection Lock enter the user options by
pressing < and > simultaneously for 3 seconds.
5. Change to Off.
Press > to accept.
Once the User Menu is exited all buttons will be free to
adjust.
NOTE: To exit User Options press < and >
simultaneously for 3 seconds.
Together
On/Off
setting
3 sec
Special Note:
The following only applies when the Intelligent delayed start feature is enabled.
Ask your installer for details
When the delay period is operating indicated by the flame symbol flashing, pressing any button returns the
DT10RF Programmer to auto mode allowing normal button operation until the next time/temperature event,
when it will resume the delay start mode or follows the Holiday, Manual, Override or Off modes as selected.
Changes to the installer options and pre-set programmes must be made with the flame symbol not flashing
What is Intelligent delayed start.
The Intelligent Delayed Start is an energy saving feature which automatically reduces the warm up time for
the heating system.
As the weather becomes milder, Intelligent Start will delay the heating start times so that the fuel is not
wasted bringing the room up to temperature earlier than necessary.
NOTE: See page 28 for further information and set up details.
OPERATING & INSTALLATION
INSTRUCTIONS
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
12
8_716_115_493a 9/2/09 09:46 Page 16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DT10RF DIGISTAT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DT10RF DIGISTAT in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info