746905
12
Zoom out
Zoom in
Previous page
1/24
Next page
en Home Connect
12
Manual registration in the home network
Notes
The extractor hood cannot be switched on during the
connection process. You can cancel the process at
any time by pressing the # symbol.
To connect the extractor hood to your home
network, the hood and the light must be switched off.
1. Press and hold the D button until LED 7 on the
appliance flashes.
2. Press the @ button twice to start logging into your
home network manually.
LED 2 and LED 7 will flash.
3. Follow the instructions in the app.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect app.
LED 3 and LED 7 will flash.
4. On your mobile device, follow the instructions for
manually logging into your network.
The login process is complete when LED 7 on the
appliance stops flashing and remains continuously lit.
Connecting to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your extractor hood.
Notes
The appliance must be connected to the network.
The app must be open.
1. Press and hold the D button until LED 3 and
LED 7 start flashing.
2. On your mobile device, follow the instructions in the
Home Connect app.
The connection process is complete when LED 7 on the
appliance stops flashing and remains continuously lit.
Software update
Using the software update function, your extractor
hood's software can be updated (e.g. for the purpose of
optimisation, troubleshooting or security updates). To
do this, you need to be a registered Home Connect
user, have installed the app on your mobile device and
be connected to the Home Connect server.
As soon as a software update is available, you will be
informed through the Home Connect app and will be
able to start the software update via the app.
Once the update has been successfully downloaded,
you can start installing it via the Home Connect app if
you are on your local area network.
The Home Connect app will inform you once installation
is complete.
Notes
You can continue to use your extractor hood as
normal while updates are downloading.
Depending on your personal settings in the app,
software updates can also be set to download
automatically.
We recommend that you install security updates as
soon as possible.
Remote diagnostics
If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
available in your country.
Note: For more information and to check whether the
remote diagnostics service is available in your country,
please visit the Help & Support area of the Home
Connect website for your country: www.home-
connect.com
Resetting the connection
You can reset the connections you have saved on your
home network and on Home Connect at any time.
Press and hold the w and @ buttons until LED 7 on the
appliance goes out. An audible signal will sound.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DRC97AQ50B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DRC97AQ50B in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info