746965
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Intensive setting
Activate intensive mode to eliminate strong smells and odours.
In this mode, the extractor hood operates at its maximum fan
setting for a short time. After a short time, it automatically
switches back to a low setting.
Switching on
Press the = button on the remote control or the û button for
intensive mode on the extractor hood's control panel.
Intensive mode
The
# and the first three û buttons will light up on the extractor
hood's control panel. The fourth
û button will flash. Intensive
mode is now activated.
Note: After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set beforehand.
Switching off
Press the
= button on the remote control or the û button for
intensive mode on the extractor hood's control panel.
Intermittent mode
The intermittent function automatically switches on the extractor
hood for 10 minutes every hour. After 24 hours, this function
switches itself off again.
Note: If intensive mode or the run-on function has been
activated, the intermittent function will not be available.
Switching on
Press and hold the
K button on the remote control or press the
Þ button on the extractor hood's control panel.
Intermittent function
The # button on the extractor hood's control panel will light up.
The first
û button and the Þ button to the left of the = button on
the extractor hood's control panel will flash. The intermittent
function is now on. The extractor hood starts at power setting 1.
Switching off
Press the
" button on the remote control or the # button on
the extractor hood's control panel.
This switches off the intermittent function.
Run-on function
The run-on function allows the extractor hood to continue
running for a few minutes after it has been switched off. This
eliminates any remaining cooking smells. The extractor hood
will then switch itself off automatically.
Switching on
Note: If intensive mode or the intermittent function has been
activated, the run-on function will not be available.
1. Select the power setting.
2. Press the K button on the remote control or the Þ button for
the run-on function on the extractor hood's control panel.
The
# button on the extractor hood's control panel will light
up. The first button
Þ and the buttons for the power settings
that have been applied will flash. The fan continues to run at
this power setting for 15 minutes and then switches off
automatically once this time has elapsed. If the lighting has
been switched on, this is also switched off once the run-on
time has elapsed.
Switching off
Press the
" button on the remote control or the # button on
the extractor hood's control panel.
This will deactivate the run-on function immediately.
Lighting
The lighting will work even if the extractor hood is switched off.
Switching on
Press the
k button on the remote control or the = button on
the extractor hood's control panel.
Switching off
Press the
k button on the remote control or the = button on
the extractor hood's control panel.
Cleaning protection
The appliance is equipped with a cleaning protection function.
When this function is activated, the control panel can be
cleaned without changing the settings.
Switching on
1. Switch off the extractor hood and lighting.
2. Press and hold the # button on the extractor hood's control
panel for approximately 5 seconds.
Each of the buttons on the control panel will flash, one after the
other.Cleaning protection is now on.
Switching off
Press and hold the
# button on the extractor hood's control
panel for approximately 5 seconds until the buttons on the
control panel stop flashing.
Cleaning protection is now off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DID126G20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DID126G20 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch DID126G20

Bosch DID126G20 Additional guide - English, German - 16 pages

Bosch DID126G20 User Manual - German - 28 pages

Bosch DID126G20 Additional guide - Dutch - 16 pages

Bosch DID126G20 User Manual - Dutch - 28 pages

Bosch DID126G20 Additional guide - French - 16 pages

Bosch DID126G20 User Manual - French - 28 pages

Bosch DID126G20 Additional guide - Italian, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info