773186
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
Operating the appliance
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Controls
Use the remote control to set and adjust the various different
functions of your appliance.
Note: The remote control requires CR2032/3 V batteries. Refer
to the Changing the batteries in the remote control section for
instructions on how to insert the batteries.
Note: Point as accurately as you can with the remote control to
the infrared receiver on the extractor hood's control panel.
Note: Heat and penetrating moisture may damage the remote
control. Never expose the remote control to intense heat or
moisture.
Remote control
Operating buttons
Extractor hood's control panel
Operating buttons
Switching the appliance on and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a high
fan setting.
Switching on the appliance
Press the " button on the remote control or the # button on
the extractor hood's control panel.
The extractor hood starts at fan setting 1.
Button 1 lights up.
Selecting the fan setting
To apply a fan setting, press the @ or A button on the remote
control or button 1, 2 or 3/G for the fan setting you require on
the extractor hood's control panel.
Button 1 lights up when fan setting 1 has been selected.
Buttons 1 and 2 light up when fan setting 2 has been selected.
Buttons 1, 2 and 3/G light up when fan setting 3 has been
selected.
Buttons 1 and 2 light up and button 3/G flashes when intensive
mode has been selected.
Switching off the appliance
Press the " button on the remote control or the # button on
the extractor hood's control panel.
Intensive setting
Activate intensive mode to eliminate strong smells and odours.
In this mode, the extractor hood operates at its maximum fan
setting for a short time. After a short time, it automatically
switches back to a low setting.
Switching on
Press the = button on the remote control or press and hold
button 3/G on the extractor hood's control panel.
Buttons 1 and 2 light up and button 3/G flashes. Intensive
mode is now activated.
Note: After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set beforehand.
Switching off
Press the = button on the remote control or the # button on the
extractor hood's control panel.
Button Explanation
"Switch the extractor hood on and off
kSwitch the lighting on and off
=Switch on intensive mode
KSwitch on the run-on function/intermittent
function
@Increase the fan setting
ADecrease the fan setting
(Infrared receiver
0Operating buttons
8Saturation indicator
Button Explanation
#Switches the extractor hood on and off
1 Switches on fan setting 1
2 Switches on fan setting 2
3/GSwitches on fan setting 3/intensive mode
=Switches the lighting on and off
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch DID106T50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch DID106T50 in the language / languages: English as an attachment in your email.

The manual is 1.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info