24
Fitting the extractor hood
To a wall-hanging cupboard
60 cm wide extractor hood:
With 4 screws.
1. Dimensions for the mounting boreholes
can be found in, or place a template on
the base of the wall-
hanging cupboard.
2. Mark the mounting holes and make pilot
holes with a bradawl.
In exhaust-air mode (upwards) mark the
exhaust-air opening and saw out.
❑ Consider the location of the
connection cable; if required, saw out
the cupboard.
3. Remove the filter grille
(see Instructions for use).
4. Screw the extractor hood to the base of
the cupboard.
Final assembly
Exhaust-air mode:
❑ Stick the enclosed covering foil over the
air outlet grille on the top of the
extractor hood.
Ensure that the surface is clean.
❑ Connect the pipes.
2-motor extractor hood
Selecting the operating mode:
❑ Exhaust-air mode: Position 1
❑ Circulating-air mode: Position 2
❑ Select the operating mode on the left or
right with a screwdriver.
❑ Connect to the power supply.
❑ Insert the filter grille
(see Instructions for use).
