Manual Bosch D-tect 120 (page 13 of 229) (All languages)

786290

Zoom out

Zoom in

1/229

English | 13

as building plans and photographs taken during con-

struction, etc. before carrying out any drilling, sawing

or routing work on walls, ceilings or floors. The accur-

acy of the measuring tool may be affected by environ-

mental influences, such the level of humidity or there be-

ing other electronic devices nearby. The structure and

condition of the walls (e.g. damp, building materials con-

taining metal, electrically conductive wallpaper, insulat-

ing materials, tiles) and the number, type, size and posi-

tion of the objects may distort the measuring results.

uMake sure that you are properly earthed when taking

measurements. If you are not properly earthed (e.g. by

wearing insulating footwear or by standing on a ladder), it

will not be possible to locate live cables.

uIf there are gas pipes in the building, check to ensure

that none of them have been damaged after complet-

ing any work on walls, ceilings or floors.

uLive wires can be detected more easily when power con-

sumers (e.g. lamps, appliances) are connected to the

wire being sought and switched on. Switch off power

consumers and make sure that live cables are de-ener-

gised before drilling, sawing or milling into walls, ceil-

ings or floors. After performing any kind of work,

check to ensure that objects placed on the base ma-

terial are not live.

uWhen attaching objects to dry walls, and in particular

when attaching them to the substructure, check to en-

sure that both the wall and the fastening materials

have a sufficient load-bearing capacity.

Product Description and

Specifications

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The measuring tool is intended for the detection of objects in

walls, ceilings and floors. Depending on the material and

condition of the base material, it is possible to detect metal

objects, timber joists, water-filled plastic pipes, conductors

and cables.

The measuring tool complies with the limits of the standards

specified in the declaration of conformity.

On this basis, clarification is required as to whether the

measuring tool can be used in places such as hospitals, nuc-

lear power plants and in the vicinity of airports and mobile

phone base stations.

The measuring tool is suitable for indoor use.

Product features

The numbering of the product features shown refers to the il-

lustration of the measuring tool on the graphic page.

(1) Top marking aid

(2) Left-hand and right-hand marking aids

(3) Concrete operating mode button

(4) Audio signal button

(5) Gripping surface

(6) Rechargeable battery/battery adapter release

buttona)

(7) Battery packa)

(8) On/off button

(9) Universal operating mode button

(10) Drywall operating mode button

(11) Display

(12) Indicator light

(13) Serial number

(14) Sensor area

(15) Battery adapter capa)

(16) Battery adapter receptaclea)

(17) Battery bay

(18) Non-rechargeable batteriesa)

a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Display elements (seefigureA)

(a) Indicator for live wires

(b) Procedure indicator

(d) Orientation arrows to determine the object’s centre

(e) Measuring indicator

(f) Service indicator

(g) Battery pack temperature monitoring indicator

(h) Interference from radio waves indicator

(i) Audio signal indicator

(j) State of charge of rechargeable batteries/non-re-

chargeable batteries

Technical data

Universal detector D-tect 120

Article number 3601K813..

Max. detection depthA)

– Concrete operating mode 120mm

– Concrete operating mode: Metal objects 120mm

Bosch Power Tools 1 609 92A 7KZ | (25.04.2022)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch D-tect 120 in the language / languages: All languages as an attachment in your email.

The manual is 4.37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch D-tect 120 Manual

Product: