Manual Bosch CSG656BS7B (page 28 of 60) (English)

746202

Zoom out

Zoom in

1/60

en Cleaning function

onto these surfaces, dab it off immediately using water

and a sponge cloth. Do not rub the surface and do not

use abrasive cleaning aids.

:Warning – Risk of burns!

; The appliance becomes very hot on the outside

during the cleaning function. Never touch the appliance

door. Allow the appliance to cool down. Keep children

at a safe distance.

Setting the cleaning function

Before setting the cleaning function, ensure that you

have followed all instructions for preparation.

The duration for the cleaning function is preset to 1

hour. It cannot be changed.

1. Touch the Menu field.

The list of operating modes are displayed.

2. Touch the "Cleaning" text field.

3. Touch the "EcoClean" text field.

4. Press the l Start/Stop button to start.

The time counts down on the display. The heating

line does not appear for the cleaning function.

The cleaning function starts.

Ventilate the kitchen when the cleaning function is

running.

When the cleaning function has ended, an audible

signal sounds. The duration 00 m 00 s is shown on the

display. Press the ÿ On/Off button to switch off the

appliance.

Setting a later end time

You can set a later end time. Before starting the

appliance, touch the "End" text field and set a later end

time using the rotary selector.

The appliance switches to standby after it is started. The

end time can no longer be changed.

Cancel

If you would like to cancel the cleaning function, switch

the appliance off using the ÿ On/Off button. You can

no longer pause the operation using the l Start/Stop

button.

Note: The operating hour counter is not reset. The

instruction for the cleaning function is still shown on the

display.

Once the cleaning function has finished

Once the cooking compartment has cooled down, wipe

down the cooking compartment with a damp cloth if

necessary.

Note: During operation and while the cleaning function

is active, reddish patches may form on the surfaces.

This is not rust, but residue from food. These spots are

not harmful and do not impair the cleaning ability of the

self-cleaning surfaces.

Descaling

To ensure that your appliance continues to operate

correctly, it must be descaled regularly.

Descaling comprises a number of different steps. For

hygiene reasons, the descaling programme must be

run through completely before the appliance is ready

for operation again. In total, the descaling programme

runs for approx. 70–95 minutes.

■Descale (approx. 55–70 minutes), then empty and

refill the water tank

■First rinsing cycle (approx. 9–12 minutes), then

empty and refill the water tank

■Second rinsing cycle (approx. 9–12 minutes), then

empty and dry the water tank

If descaling is interrupted (e.g. due to a power failure or

because the appliance is switched off), you will be

prompted to rinse the appliance twice when you switch

it back on. The appliance cannot be used until the

second rinsing cycle has finished.

The frequency with which the appliance must be

descaled depends on the hardness of the water used.

When only another five or fewer steam-assisted

operations are possible, the appliance reminds you to

descale it with a message on the display. The number

of remaining operations is displayed after the appliance

is switched on. You can therefore prepare for the

descaling in good time.

Starting

Caution!

■Risk of damage to the appliance: Only use liquid

descalers recommended by us for the descaling

programme. The time the product needs to work

during descaling depends on the type of descaler

used. Other descalers may damage the appliance.

Descaler order no. 311 680

■Descaling solution: Do not allow any descaling

solution or descaler to come into contact with the

control panel or other surfaces on the appliance.

This damages the surfaces. If this does happen,

remove the descaling solution immediately with

water.

If you have used a steam-assisted operation

immediately before descaling, you must first switch the

appliance off so that the residual water is pumped out

of the evaporator system.

1. Mix 400 ml water with 200 ml liquid descaler to

make a descaling solution.

2. Use the ÿ On/Off button to start.

3. Remove the water tank and fill it with descaling

solution.

4. Once the water tank has been filled with descaling

solution, push it back in again fully.

5. Close the control panel.

6. Touch the Menu field.

The list of operating modes is displayed.

7. Touch the "Cleaning" text field.

8. Touch the "Descaling" text field.

The duration of the descaling programme is

displayed. It cannot be changed.

9. Press the Start/Stop button l to start.

The appliance is now descaled. The time counts down

in the display.

Once the cooking time has elapsed, an audible signal

sounds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CSG656BS7B in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch CSG656BS7B Manual

Product: