697302
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
Troubleshooting
CS200 – 6720830474 (2015/06)
The info menu is adapted to your system automatically. Some
menu items are only available if the system has been set up
accordingly and the solar controller has been set correctly.
Menu structure of the info menu:
Info
Solar
Solar sensors
Solar yield
DHW
Menu: Solar
Information is only displayed under the individual menu items if
the corresponding parts of the system are installed.
Table 6 Information about the solar system
Calling up information about the solar system
If the standard display is active, press the info key to open
the info menu.
Press the rotary control knob to open the Solar menu.
Turn the rotary control knob to mark the Solar sensors
menu item and press the rotary control knob.
The current temperature at the temperature sensor with
the lowest number is displayed. The number in the graphic
indicates the position of the temperature sensor in the
system, e.g. collector temperature [1].
Turn the rotary control knob to call up more temperatures.
The graphics in the info menu in the solar system show the
installed pumps, mixers and valves. When a pump is
running the symbol for the pump is rotating . Solid
triangles in the symbols for mixers or valves indicate the
direction in which the heat transfer fluid is flowing.
Calling up information about the solar yield
If the standard display is active, press the info key to open
the info menu.
Press the rotary control knob to open the Solar menu.
Turn the rotary control knob to highlight Solar yield and
press the rotary control knob.
The solar yields for the current week are displayed.
Turn the rotary control knob to switch the display between
solar yield for the current week, solar yield for last week and
total yield of solar system since commissioning.
Calling up information about the DHW system
These menu items are only available if the system has been set
up accordingly. Under these menu items the DHW system is
displayed according to the solar system. The temperature
sensors are displayed separately.
7 Troubleshooting
Use Tab. 7 (overleaf) to check if the fault can be fixed.
If the fault cannot be fixed, contact your installer
immediately.
A fault in your solar system is indicated on the display of the
solar controller.
If there are multiple faults, the fault with the highest priority will
be displayed. Fault codes and sub-codes are displayed. The
codes inform your installer about the possible cause. Confirm a
fault (press the rotary control knob) to switch to the standard
Menu item Description
Solar sensors
(graphics)
Current temperatures and position of the
selected temperature sensor
Solar yield Solar yield for last week, solar yield for
current week and total yield of solar system
since the solar system was commissioned
0010003255.001
0010003256.001
0010003258.001
0010003259.001
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CS 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CS 200 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch CS 200

Bosch CS 200 Installation Guide - English - 16 pages

Bosch CS 200 User Manual - German - 12 pages

Bosch CS 200 Installation Guide - German - 20 pages

Bosch CS 200 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info