809354
8
Zoom out
Zoom in
Previous page
1/16
Next page
Operation
Climate Room Control – 6721841498 (2022/04)
64
The ON/OFF timer cannot be set at a secondary wired room
controller.
5.5.2 Weekly ON/OFF timer
Setting timer
Press the TIMER key until WEEK 1 appears in the display.
▶Confirm with key.
Press the . or / key to select the weekday.
▶Confirm with key.
Press the . or / key to set the desired ON time.
▶Confirm with key.
Press the . or / key to set the desired OFF time.
▶Confirm with key.
Up to four times can be set.
Repeat procedure every subsequent day of the week.
To delete the timer for the selected day:
Press the DAY OFF key.
Activating the timer
Keep pressing the TIMER key until WEEK 1 appears in the
display.
The timer is now switched on. The unit is switched on or off
at the selected times and days.
Deactivating the timer
Keep pressing the TIMER key until WEEK 1 disappears in
the display.
To switch off the unit when the week timer is active:
▶Briefly press K key.
The unit switches off until the next ON timer is reached.
▶Hold the K key pressed for two seconds to switch off the
unit and deactivate the week timer.
Programming the switch-on delay
If week timer 1 is active and the ON time is to be delayed.
Select week timer 1 with TIMER key.
Press the DAY OFF key 2x until 1h appears on the display.
Wait for a few seconds while the setting is saved.
The unit now starts the next activity cycle following a delay
of 1 hour.
Press the DAY OFF key 3x until 2h appears on the display.
The unit now starts the next activity cycle following a delay
of 2 hours.
5.5.3 Weekly event timer
Setting timer
Up to 8 events can be set for each day to change the operating
mode, temperature and fan speed.
Keep pressing the TIMER key until WEEK 2 appears in the
display.
▶Confirm with key.
▶Press the . or / key to select the weekday.
▶Confirm with key.
▶Press the . or / key to select the setting time, main
operating mode, temperature or fan speed for the event.
▶Confirm with key.
Make the setting and press the key to confirm or the
DAY OFF key to delete the setting.
Repeat the procedure to define additional setting periods
for this day.
Follow the same procedure to program additional
weekdays.
To delete the timer for the selected day:
▶Press the DAY OFF key.
Defining the setting time
▶Press the . or / key to adjust the time.
▶Confirm with key.
Selecting the main operating mode
▶Press the . or / key to select the main operating mode
( Table 29, [1], page 62) ).
▶Confirm with key.
The fan speed cannot be adjusted in automatic and
dehumidification mode.
Setting the room temperature
▶Press th . or / key to set the desired room temperature.
▶Confirm with key.
Fan step
▶Press the . or / key to adjust the fan step.
▶Confirm with key.
The temperature cannot be adjusted in Fan Mode.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CRC R-1 Climate Room Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CRC R-1 Climate Room Control in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info