697152
6
Zoom out
Zoom in
Previous page
1/12
Next page
6720856748 (2016/03) CR50
6 | Operating the appliance
Set heat begin or setback begin earlier or later
(move switching time)
Open time program for all weekdays or one weekday.
Select and confirm the switching time.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
Moving switching time to the desired time.
The setting in the value display changes in 15-minute
increments and in the segment display in 30-minute
increments.
Confirm setting.
Add a new heating phase (such as Heat begin2 to Strt
setback2)
If all six switching times in the time program are not being used,
a new heating phase can be added.
Open time program for all weekdays or one weekday.
Select and confirm Heat begin2.
The new switching time is added. The hour and associated
segment in the segment display start to flash.
Set the switching time for Heat begin2, such as 14:00, and
confirm.
The new heating phase is added with a duration of one half-
hour. Strt setback2 is set to 14:30. If necessary, move
Strt setback2 to, for example, 23:00.
Interrupt heating phase with setback phase (e. g. add
setback phase between Heat begin2 and Strt setback2)
Open time program for all weekdays or one individual
weekday.
Select Strt setback2 (end of the heating phase to be
interrupted).
▶Set Strt setback2 to the start of the interruption, such as
18:00.
Add a new heating phase and set heat begin and setback
begin, such as Heat begin3 (21:00) to Strt setback3,
(23:00).
The user interface automatically sorts the heating phases
chronologically.
Delete new heating phase (such as Heat begin2 to Strt
setback2)
Open time program for all weekdays or one individual
weekday.
Select and confirm Strt setback2.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
▶Set Heat begin2 to the same time as Strt setback2.
Does Delete? appear in the text line?
Confirm Delete? to delete the heating phase.
4.4 Setting up a holiday program
Open the vacation menu
Open the main menu.
Select and confirm the Holiday menu.
The menu item Holiday prog. is displayed.
Activate the holiday program and set the vacation time
Select and confirm the Holiday menu until the OFF setting
value flashes.
0010006011-001
Strt setback1
Strt setback1
0010006012-001
Heat begin2
Heat begin2
0010006013-001
Strt setback2
Strt setback2
0010006014-001
Strt setback3
Strt setback3
0010006016-001
Delete?
Delete?
0010006017-001
Holiday prog.
Holiday prog.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CR 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CR 50 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch CR 50

Bosch CR 50 Installation Guide - English - 12 pages

Bosch CR 50 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info