746670

Bosch CPA565GS0B Manual

31
Zoom out
Zoom in
Previous page
1/48
Next page
en Cleaning
30
--------
Notes
■Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Cleaning self-cleaning surfaces
The rear panel of the cooking compartment has a self-
cleaning, catalytic coating. This coating absorbs and
dispels splashes from baking and roasting while the
appliance is in operation. It is therefore not necessary to
clean this area.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This damages the surfaces. If oven cleaner does get
onto these surfaces, dab it off immediately using water
and a sponge cloth. Do not rub the surface and do not
use abrasive cleaning aids.
When the cooking compartment has cooled down,
remove the brown or white residue with water and a soft
sponge.
Note: During operation, reddish spots form on the
surfaces. This is not rust, but residue from food. These
spots are not harmful and do not restrict the cleaning
ability of the self-cleaning surfaces.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
Tips
■Clean the cooking compartment after each use. This
ensures that dirt cannot be baked on.
■Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■Use the glass tray for baking very moist cakes.
■Use suitable ovenware for roasting, e.g. a roasting
dish.
■Where possible, use hot air. This type of heating
creates less dirt.
Stainless-steel
surfaces
Hot soapy water:
Clean with a dishcloth.
Do not scour.
Check the position of the door seal after cleaning
it.
Accessories Hot soapy water:
Soak and clean with a dish cloth or brush.
Drip tray and
water tank
Hot soapy water:
Clean with a dish cloth and rinse thoroughly with
clean water to remove residual detergent.
Dry with a soft cloth. Leave to dry with the lid
open. Rub the seal on the lid until dry.
Do not clean in the dishwasher.
Tank recess Rub dry after every use.
Steam outlet in
cooking compart-
ment
Hot, soapy water: Use a cleaning sponge or a soft
washing-up brush.
Cleaning function en
31
.Cleaning function
Cl eani ng f unct i on
Descaling
To ensure that your appliance continues to operate
correctly, it must be descaled regularly.
Caution!
■Risk of damage to the appliance: Only use the
descaler recommended by us for descaling, either in
liquid or tablet form.The time the descaler needs to
be left to work depends on the product used.Other
descalers may damage the appliance. You can
order descaler from our after-sales service.
Liquid descaler: Order no. 00311680 Descaling
tablets: Order no. 00311864
■Descaling solution: Do not allow any descaling
solution or descaler to come into contact with the
control panel or other surfaces on the appliance.
This may damage the surfaces. If this does happen,
remove the descaling solution immediately with
water.
Descaling consists of two automated steps. For hygiene
reasons, the descaling program must be run through
completely before the appliance is ready for operation
again. Descaling will take around 32 minutes in total.
■Descale the appliance (approx. 31 minutes), then
empty the drip tray and fill the water tank with fresh
water.
■Run a rinse cycle after descaling the appliance
(approx. 1 minute), then empty the drip tray.
If descaling is interrupted (e.g. due to a power failure,
because the appliance is switched off or because the
descaling process is cancelled), you will be prompted
to run a rinse cycle once the appliance is switched back
on.The appliance cannot be used until the rinse cycle
comes to an end.
The frequency with which the appliance must be
descaled depends on the hardness of the water used.
When only five more steam-assisted operations are
possible (or fewer), the Ê symbol appears on the
appliance display, reminding you to descale it. You can
therefore prepare for the descaling in good time.
The steam mode is then only possible after the
descaling process has been completed.
Starting
1. Use the function selector to select Descale Ê.
The duration of the descaling process will be
displayed.It cannot be changed.
2. Open the tank cover.
3. Remove and empty the drip tray.
4. Slide the empty drip tray in fully.
5. Remove the water tank.
6. Mix water and descaler to create a descaling
solution.
Note: Observe the mixing ratio of the descaling
agent.
Descaling liquid (Order no. 00311680): Mixing ratio
1:5, mix 50ml descaling liquid with 250ml water.
Descaling tablets (Order no. 00311864): Add one
descaling tablet (18g) to 250ml water and let
dissolve for five minutes.
7. Pour the descaling solution into the water tank and
slide the water tank in fully.
8. Close the tank cover.
9. Touch the start l stop button.
The appliance will now be descaled. The remaining
time counts down on the display. An audible signal
will sound once descaling has finished.The
appliance pauses.
10. Open the tank cover.
11. Remove the drip tray, empty it and slide it back in.
12. Remove the water tank, rinse it thoroughly, fill it with
fresh water and slide it back in.
13. Close the tank cover.
14. Touch the start l stop button.
The appliance will now be rinsed twice automatically.
An audible signal will sound once the rinse cycles
have finished. Empty the drip tray.
Rinsing
To ensure that your appliance stays clean, you can
pump water through the pipe system. The water is then
drained to the drip tray.
Note: After rinsing, there can be dissolved lime
particles in the drip tray. This is normal and does not
affect operation.
Starting
1. Use the function selector to select the rinse cycle !.
The duration of the programme will be displayed.It
cannot be changed.
2. Open the tank cover.
3. Remove and empty the drip tray.
4. Slide the empty drip tray in fully.
5. Remove water tank and drain any residual water.
Rinse out water tank thoroughly and fill with fresh
water.
6. Slide the water tank in fully.
7. Close the tank cover.
8. Touch the start l stop button.
Water is pumped through the pipes.The time
remaining will count down on the display. An audible
signal will sound once this time has elapsed. Empty
the drip tray.
Subsequent cleaning
Carry out the following steps after every descaling
programme or rinse cycle:
1. Open the tank cover.
2. Empty, clean and dry the drip tray and water tank.
3. Turn the function selector to the off position.
The process is complete and the appliance is ready
for use again.
Emptying the drip tray
With the cleaning functions, the residual water is
collected in the drip tray. Then empty and dry the drip
tray.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CPA565GS0B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CPA565GS0B in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info