697410
27
Zoom out
Zoom in
Previous page
1/40
Next page
6 720 646 804
Troubleshooting/Problem Solving
27
Not enough or no hot water. Water usage may have exceeded
the capacity of the water heater.
Wait for the water heater to recover after
an abnormal demand.
A fuse is blown or a circuit
breaker tripped.
Replace fuse or reset circuit breaker.
Electric supply may be off. Make sure electric supply to water heater
and disconnect switch, if used, are in the
ON position.
Water temperature may be set
too low.
See the Water temperature setting sec-
tion.
Leaking or open hot water
faucets.
Make sure all faucets are closed.
Electric service may be inter-
rupted.
Contact the local electric utility supplier.
Improper wiring. See the Installation Instructions section.
Manual reset limit (TCO). See the Water temperature setting sec-
tion.
Cold water inlet temperature may
be colder during winter months.
This is normal. The colder inlet water
takes longer to heat.
Water is too hot. Water temperature is set too high. See the Water temperature setting sec-
tion.
Electronic control has failed. Call for service.
Rumbling noise. Water conditions in your home
caused a buildup of scale or min-
eral deposits on the heating ele-
ments.
Remove and clean the heating elements.
Relief valve producing popping
noise or draining.
Pressure buildup caused by ther-
mal expansion to a closed system.
This is an unacceptable condition and
must be corrected. Contact the water
supplier or plumbing contractor on how
to correct this. Do not plug the relief
valve outlet.
The filter light is on. The filter requires cleaning. A
clean filter is necessary for effec-
tive operation.
Follow the instructions on how to remove
and clean the filter on page 24.
Unit is not making noise. If unit is using the electric ele-
ments, it will not make noise.
Check mode of unit.
Problem Cause Solutions
Table 5
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Compress 3000 - HP 200-1 E AI-F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Compress 3000 - HP 200-1 E AI-F in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info