746207
17
Zoom out
Zoom in
Previous page
1/36
Next page
en Microwave
16
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
from the highest to the lowest level.
If the microwave function is only added after the
start, the appliance pauses. Press start l stop to
start operation
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.
Automatic programmes en
17
PAutomatic programmes
Aut omat i c pr ogr ammes
You can prepare food really easily using the automatic
programmes. You select the programme and enter the
weight of your food. The automatic programme then
applies the most suitable settings. You can select from
15 programmes.
Notes
Take the food out of its packaging and weigh it. If it
is not possible to enter the exact weight, you should
round it up or down.
Place the food in the cold cooking compartment.
For the programmes, always use microwaveable,
heat-resistant cookware, for example made of glass
or ceramic. Observe the accessories tips in the
programme table.
For an optimal cooking result, use food that is in
good condition and chilled meat only. For frozen
food, use food straight out of the freezer only.
Setting a programme
Example in the picture: Programme 3with a weight of
1kg.
1. Set the function selector to % automatic
programmes.
The first programme number and weight suggestion
are shown in the display.
2. Use the rotary selector to select programme number
3.
3. Touch h.
The weight setting is highlighted in the display.
4. Use the rotary selector to set the weight to 1kg.
The appliance automatically sets the right cooking
time for that weight.
5. Touch start l stop.
The programme will start. The cooking time visibly
counts down and the temperature bar and the
start l stop LED light up.
Notes
Before starting you can use % and h to switch
between programmes and weight.
Once you have started the programme, the
programme number and weight cannot be changed.
You can check the set weight by touching h.
The programme has ended
An audible signal sounds. The programme has finished;
the appliance stops heating.
Turn the function selector to the off position.
Changing the programme
1. Touch the start l stop field for approx. four seconds.
The programme is reset.
2. Select a new programme.
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CMA583MS0B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CMA583MS0B in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch CMA583MS0B

Bosch CMA583MS0B User Manual - French - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info