809322
8
Zoom out
Zoom in
Previous page
1/16
Next page
Operation
Climate 5000 L • Climate 5000i U/L – 6721841496 (2021/10)
42
3.8.4 Additional settings for weekly timer
Provisionally disabling the timer
To disable the timer on selected days only:
Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
Press the key.
Press the . or / key to select the weekday.
Press the DAY OFF key.
The selected day is no longer displayed.
The timer is deactivated for the days that are not displayed until the day
has passed.
Press the DAY OFF key again to display the day once again.
Repeat the above if necessary for the other days.
Adopting (copying) settings from one day to another day
Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
Press the key.
Press the . or / key to select the day whose settings should be
adopted.
Press the COPY key to copy the settings.
CY appears on the display.
Press the . or / key to select the day to which the settings should
be copied.
Press the COPY key to insert the copied settings.
The selected weekday flashes briefly as confirmation.
Repeat the above steps if necessary to copy the information to other
days.
Press the key to adopt the changes.
3.9 Other functions
3.9.1 Switching the key sound on/off
To switch the the key sound of the wired room controller on or off:
Press and hold the and FUNC. keys for three seconds.
3.9.2 Turbo cool/Turbo heat
When Turbo cool/Turbo heat is active, the indoor unit operates at
maximum power to heat or cool the room quickly.
Turbo Cool:
Switch on cooling mode.
Press the FUNC. key.
Confirm with key.
Turbo Heat:
Switch on heating mode.
Press the FUNC. key.
Confirm with key.
Exiting the function:
Press the FUNC. key again.
Confirm with key.
3.9.3 Noise reduction (Silent Mode)
This function reduces the noises emitted by the indoor and outdoor unit
when it is in operation. This is particularly advantageous at night, if you
need to show consideration for your neighbours.
During operation, press the key for 2 seconds.
Exiting the function:
Press the key again for 2 seconds.
-or-
Press the K key, Mode key, Turbo key or Clean key.
When the outdoor unit is in quiet mode, it may not be possible to achieve
the required cooling/heating capacity because the compressor operates
at a low frequency.
3.9.4 Self-cleaning (I clean)
The device has a self-cleaning function for the evaporator. The self-
cleaning freezes dust, mould and grease. Everything is then quickly
defrosted and dried with hot air.
To activate the self-cleaning: press the Clean key.
CL appears on the display of the indoor unit when self-cleaning is in
progress. Self-cleaning ends automatically after 20 to 45 minutes.
3.9.5 Sleep mode
The purpose of this function is to save energy during idle times. After an
hour, the device heats or cools less intensely. To do this, the set
temperature is changed by 1 °C. After two hours, the set temperature
changes by a further 1 °C. Then it remains at the new temperature.
The function is not available in dehumidification mode and Fan Mode.
3.9.6 Wireless control function
The purpose of this function is to establish a connection via WLAN.
To connect to WLAN an IP-Gateway (optional accessory) must be
installed.
NOTICE
For TWIN installation, an IP gateway is sufficient for the master unit. No
gateway is required for the slave unit.
3.9.7 Keylock
The keys of the wired room controller can be locked with the keylock.
To switch the keylock on or off:
Press/keep the TIMER and COPY keys pressed simultaneously for
three seconds.
The symbol appears in the display when the keylock is active.
3.9.8 Follow me function (Follow Me)
This function activates the temperature sensor of the wired room
controller. The room temperature is measured at the position of the
wired room controller instead of at the indoor unit.
Switch off heating or cooling mode if required.
Press the FUNC. key to switch the function on or off.
When the function is active the wired room unit displays the
symbol.
Confirm with key.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Climate 5000i U-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Climate 5000i U-L in the language / languages: English as an attachment in your email.

The manual is 4.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info