613833
19
Zoom out
Zoom in
Previous page
1/24
Next page
6 720 607 800 (2016/03)
Gas regulation | 19
8.2 Pressure regulation
Access to the adjuster screw
Remove the appliance front cover (see page 16).
Press both tabs (A) simultaneously and pull the control
box.
Fig. 17 Remove the control box
Once the control box is removed, place it as in Fig. 18.
Fig. 18 Control box – gas adjustment position
Connection of manometer
Loosen the shutter screw (1).
Connect the U-tube manometer to the burner pressure
measuring point.
Fig. 19 Pressure measuring points
[1] Burner pressure measuring point
[2] Minimum gas flow adjustment screw
[3] Minimum gas flow adjuster
[4] Gas supply pressure measuring point for
Maximum gas flow adjustment
Main switch in position 0.
Set temperature regulator (Fig. 3, [2]) to 60 °C.
Press and hold the burner state key (Fig. 3, [4]) and set
the main switch (Fig. 3, [3]) in position I.
After pressing burner state key for at least 10 seconds, the
appliance is in maximum flow position and the burner state key
flashes.
Open the hot water tap.
Using the adjustor (Fig. 19, [3]) regulate the pressure to
achieve the values indicated in table 15.
Minimum gas flow adjustment
Main switch in position 0.
Set temperature regulator (Fig. 3, [2]) to 35 °C.
Press and hold the burner state key (Fig. 3, [4]) and set
the main switch (Fig. 3, [3]) in position I.
After pressing burner state key for at least 10 seconds, the
appliance is in minimum flow position and the burner state key
flashes.
The selection of the fastest burner pressure
process is recommended.
After regulating, let the appliance operate at
maximum power for at least 30 secs.
Minimum flow adjustment is only necessary
if the burner frequently goes out when the
water flow is reduced.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Celsius WT11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Celsius WT11 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Celsius WT11

Bosch Celsius WT11 User Manual - German - 28 pages

Bosch Celsius WT11 Usermanual and installation guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info