563426
26
Zoom out
Zoom in
Previous page
1/36
Next page
en Trouble shooting
26
--------
:Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Error messages on the display
When an error message appears on the display with "D"
or "E", e.g. D0111 or E0111, switch the appliance off
and on again using the ÿ On/Off button.
If it was a one-off error, the display goes out. If the error
message appears again, call the after-sales service and
quote the exact error message.
Replacing the cooking compartment bulb
Heat-resistant 230 V/25 W halogen bulbs with seals are
available from the after-sales service. Please specify the
E number and FD number of your appliance.
:Warning
Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:Warning
Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
1. Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
2. Turn the cover anti-clockwise to remove it.
3. Remove the bulb.
Insert the new bulb, making sure that the pins are in
the correct position.Push the bulb in firmly.
Caution!
Only operate the appliance with the glass cover and
seals.
4. Slide the new seals and the clamping ring onto the
glass cover in the right order.
5. Screw the glass cover with the seals back on again.
6. Connect the appliance to the power supply and
carry out commissioning again.
Buttons flash Normal occurrence caused by
condensation behind the con-
trol panel
As soon as the condensation has evaporated, the buttons no longer flash
Liquid in the evaporator dish has fully
evaporated, even though the water
tank is full
The water tank has not been
inserted properly
Push in the water tank completely until you feel it engage
The feed line to the water
tank is blocked
Descale the appliance
Check the set water hardness range and change it, if necessary
The water tank empties for no dis-
cernible reason. The evaporator dish
overflows
The water tank was not
closed properly
Close the lid until you feel it lock into place
The tank lid seal is dirty Clean the seal
The tank lid seal is faulty Obtain a new water tank from the after-sales service
The appliance's display prompts you
to fill up the water tank even though it
is full.
The water tank has not been
inserted properly
Push in the water tank completely until you feel it engage
The detection system is not
working
Call the after-sales service
The appliance's display prompts you
to fill up the water tank even though it
is not yet empty, or the water tank is
empty but no corresponding message
appears on the display
The water tank is dirty.The
moving water level indicators
are jammed
Shake and clean the water tank. If the jammed parts cannot be freed, obtain a
new water tank from the after-sales service
When you cook with steam, a lot of
steam is produced
The appliance is being auto-
matically calibrated
Normal procedure
When cooking with steam, a lot of
steam is produced repeatedly
The appliance is unable to cal-
ibrate itself automatically if
cooking times are too short
Reset the appliance to the factory settings and repeat the calibration process
Steam escapes from the ventilation
slots during cooking
Normal procedure Not possible
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch CDG634BS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch CDG634BS1 in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch CDG634BS1

Bosch CDG634BS1 User Manual - German - 36 pages

Bosch CDG634BS1 User Manual - Dutch - 36 pages

Bosch CDG634BS1 User Manual - French - 40 pages

Bosch CDG634BS1 User Manual - Italian - 40 pages

Bosch CDG634BS1 Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info