76186
20
Zoom out
Zoom in
Previous page
1/157
Next page
14
en
Replacing the micro active carbon filter
Figure
Unlatch the twin cylinders and open them
forwards. (See fig. 20)
Unlatch the dust container and remove it from
the appliance (see fig. 21)
Open the exhaust filter cover as far as possi-
ble in the direction of the arrow. The cover
engages in this position. (See fig. 24)
Remove and dispose of the micro active
carbon filter.
Fit a new filter (BBZ192MAF )
Close the exhaust filter cover.
Insert the dust container into the appliance
until it engages (you will hear a positive click).
Push the twin cylinders back into position
(effectively closing the vacuum cleaner),
making sure that they engage (you will here a
positive click). (See fig. 23)
Replacing the HEPA filter
Figure
Unlatch the twin cylinders and open them
forwards. (See fig. 20)
Unlatch the dust container and remove it
from the appliance (see fig. 21).
Open the exhaust filter cover as far as
possible in the direction of the arrow. The
cover engages in this position (see fig. 24).
Remove and dispose of the HEPA filter.
Fit a new filter (BBZ153HFB ).
Close the exhaust filter cover.
Insert the dust container into the appliance
until it engages (you will hear a positive click).
Push the twin cylinders back into position
(effectively closing the vacuum cleaner),
making sure that they engage (you will here
a positive click) (see fig. 23).
Cleaning the twin cylinders
Figure
Use the release button (1) to unlatch the twin
cylinders and open them forwards (see fig. 20).
Turn the cylinder cover as shown to remove
from the appliance.
Clean the cylinder and cover.
29
28
27
Figure
Replace the cylinder cover and lock it into
place by turning in the direction of the arrow
(please make sure that you replace the one
marked with an "L" on the left hand side and
the one marked with an "R" on the right hand
side).
Push the twin cylinders back into position
(effectively closing the vacuum cleaner),
making sure that they engage (you will here a
positive click) (see fig. 23).
!
Attention: The inside of the twin cylinders
may become scratched with use and start
to look opaque.This does not, however,
affect the performance of the vacuum
cleaner in any way, i.e. it will continue to
function as normal.
Care
Always switch off the vacuum cleaner and dis-
connect the power cord from the mains before
cleaning the appliance. The vacuum cleaner and
plastic accessories can be cleaned with a com-
mercial plastic cleaner.
!
Do not use a scourer, glass-cleaning agent
or all-purpose cleaning product. Never
immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be
cleaned with a second vacuum cleaner or simply
wiped with a dry cloth or dusting brush.
Subject to technical modifications.
30
Innenteil 161 767 C 03.07.2006 14:06 Uhr Seite 14
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BX 32132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BX 32132 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info