320449
19
Zoom out
Zoom in
Previous page
1/159
Next page
13
de
Emptying the dust container and
cleaning the particle filter
To achieve optimum vacuuming results, the dust
container should be emptied each time the
vacuum cleaner is used or, at the latest, when
the maximum fill level is reached. You should
also check the fluff filter, foam filter and motor
protection filter after each vacuuming job. Clean
the filters if necessary, by tapping out the dust
or rinsing them.
Emptying the dust container
Figure
Use the release button to unlock the cylinder.
The cylinder releases upwards.
Figure
Remove the dust container from the vacuum
cleaner using the handle.
Figure
Press the button (PRESS) to release the dust
container flap and empty the container into
the rubbish bin.
Emptying the dust container
Figure
Close the dust container flap and click it into
place at all 3 catches.
Cleaning the foam filter and fluff filter
Figure
Open the filter cartridge and take out the filter
frame with the fluff filter and foam filter.
Remove the fluff filter and foam filter from the
filter frame and clean them by tapping out the
dirt. If the filters are very dirty, they should
both be rinsed out. The components of the
fine-dust filter system can be cleaned in a
washing machine at 30 °C using the delicates
cycle.
Insert the foam filter into the fluff filter and
clip into the filter frame.
Insert the filter frame into the filter cartridge
and click into place, in the direction of the
arrow.
21
20
19
18
17
Cleaning the motor protection filter
Figure
Open the motor protection filter flap.
Remove the micro filter and shake it clean.
If it is very dirty, the motor protection filter
should be rinsed. The motor protection filter
can even be cleaned in the washing machine
at 30 °C on a delicates cycle.
A replacement micro filter may be ordered via
the After Sales service.
Replacement part number: 642879
!
CAUTION: The vacuum cleaner must only
be operated with the motor protection
filter, foam filter and fluff filter fitted.
The filters must be completely dry before
they are refitted in order to ensure that they
function correctly and to prevent the for-
mation of odours or bacteria (wait about
24 hours)
Figure
Fit the dust container into the vacuum cleaner
(make sure it is fitted correctly).
Push the cylinder back into position, closing the
vaccum cleaner (you will hear a positive click).
!
CAUTION: The cylinder can only be
engaged if the dust container is fitted
correctly.
Cleaning the washable exhaust filter
(made by Schwarzvlies)
Figure
Open the exhaust filter cover.
Remove the exhaust filter.
Figure
Clean the exhaust filter by knocking out the
dirt.
If the exhaust filter is very dirty, it should be
rinsed out (or washed in the washing machine
at 40°C).
Fit the exhaust filter.
Close the exhaust filter cover.
25
24
23
22
en
Innenteil 206 920 B 22.10.2007 11:54 Uhr Seite 13
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch bx 12122 bx1 parquet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch bx 12122 bx1 parquet in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info