620158
40
Zoom out
Zoom in
Previous page
1/125
Next page
39
*
Dependent on model
Vacuuming
!
Please note:
Depending on the type of hard floor involved (e.g.
rough rustic tiles), floor tools are subject to a certain
amount of wear. Therefore, you must check the
u
nderside of the floor tool at regular intervals. Worn
undersides of floor tools may have sharp edges that
can damage sensitive hard floors, such as parquet or
linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
F
igure
A
djusting the floor tool:
Rugs and carpets =>
Hard floors =>
Figure
Remove the crevice nozzle or upholstery nozzle from
the accessories compartment in the appliance lid.
Figure Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a)Crevice nozzle for vacuuming crevices and corners, etc.
b)Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
c)Hard-floor tool
For vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
Push the telescopic tube into the connecting piece
of the hard floor tool until it locks in place.
To release the connection, press the locking collar
and pull out the telescopic tube.
Figure Professional upholstery nozzle
For intensive cleaning of upholstered furniture
(attach to the handle or suction pipe, depending on
requirements).
To clean the professional upholstery nozzle, simply
vacuum it using the handle.
Figure
After use, place the crevice or upholstery nozzle back
into the accessories compartment in the appliance
lid.
Turbo brush
If your appliance is equipped with a turbo brush,
consult the accompanying instruction manual for
instructions on its use and maintenance.
Figure
You can use the parking aid on the back of the
appliance if you wish to stop vacuuming for a short
time.
Once you have switched off the appliance, slide the
hook on the floor tool into the recess on the rear of
the appliance.
11
12
13*
14*
15
16
Figure
To overcome obstacles, e.g. steps, the appliance can
also be carried by the handle on the appliance body.
When the work is done
Figure
Pull out the mains plug.
Tug the power cord briefly and then let go
(the power cord retracts automatically).
F
igure
To store or transport the appliance, you can use the
storage aid on the underside of the appliance.
Stand the appliance up on its end. Slide the catch on
the floor tool into the groove on the underside of the
appliance.
Changing the filter
!
Please note: Always switch off the appliance before
changing the filter.
Replacing the bag
Figure
a)If the dust bag change indicator lights up red
continuously when the floor tool is lifted from the
floor and the highest power setting has been
selected, the dust bag must be changed, even
though it may not yet be full. Even if the dust bag is
not full, it may still need changing, due to the type of
dust which has been vacuumed.
First check that the nozzle, suction pipe and flexible
hose are not blocked, as this would also lead to the
dust bag change indicator being triggered.
b)The handle can easily be detached from the hose to
remove blockages.
Figure Opening the lid
Open the lid by moving the locking lever in the
direction of the arrow.
Figure
a)Seal the dust bag by pulling the sealing plate, and
remove the bag.
b)Slide the new dust bag into the holder up to the stop.
!
Please note: the lid will only close if a dust bag has
been inserted.
18
19
20*
21
22
1
7
GA 9000 953 375_BSGL5_GL50 13.05.2014 15:08 Seite 39
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BSGL5319 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BSGL5319 in the language / languages: All languages as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info