Manual Bosch BSGL 50 (page 15 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

448716

Zoom out

Zoom in

1/120

igure

● After use, place the crevice or upholstery nozzle back

into the accessories compartment in the appliance lid.

Figure

Professional upholstery nozzle

● For intensive cleaning of upholstered furniture

(attach to the handle or suction pipe as required).

● To clean the professional upholstery nozzle, simply

acuum it using the handle.

● If it is very dirty, the professional upholstery nozzle

can also be opened up. To do this, turn the two

screws on the sides of the nozzle (e.g. using a coin)

and remove the inner part from the nozzle.

●

After cleaning, replace the inner part (make sure it is

correctly seated) and screw to the housing.

Figure

Hard floor tool

For vacuuming hard floor coverings

(tiles, parquet flooring, etc.)

● Push the telescopic tube into the connecting piece of

the hard floor tool until it locks in place.

● To release the connection, press the locking collar

and pull out the telescopic tube.

Figure

Cleaning the hard-floor brush

a)Vacuum the brush from underneath to clean it.

b)Cut through threads and hairs wound round the

rollers using scissors. Vacuuming strands and hairs

with the crevice nozzle.

Figure

Pet hair tool

● Floor tool for easy and thorough vacuuming of pet

hair

● To clean the nozzle, simply vacuum it using the suction

pipe/telescopic tube

Turbo brush

If your appliance is equipped with a turbo brush, please

consult the accompanying instruction manual for in-

structions on its use and maintenance.

Figure

● You can use the nozzle parking aid on the back of the

appliance if you wish to stop vacuuming for a short

time.

● Once you have switched off the appliance, slide the

hook on the floor tool into the recess on the rear of

the appliance.

Figure

To overcome obstacles, e.g. steps, the appliance can

also be carried by the handle on the appliance body.

16*

18*

17*

When the work is done

igure

● Pull out the mains plug.

● Tug the power cord briefly and then let go (the power

cord retracts automatically).

Figure

● To store or transport the appliance, you can use the

storage aid on the underside of the appliance.

●

Stand the appliance up on its end. Slide the catch on

the floor tool into the groove on the underside of the

appliance.

Changing the filter

Please note: Always switch off the appliance before

changing the filter.

Replacing the dust bag

Figure

a)If the dust bag change indicator lights up red

continuously when the floor tool is lifted from the floor

and the highest power setting has been selected, the

dust bag must be changed, even though it may not yet

be full. Even if the dust bag is not full, it may still need

changing, due to the type of dust which has been

vacuumed.

First check that the nozzle, suction pipe and flexible

hose are not blocked, as this would also lead to the

dust bag change indicator being triggered.

b)The handle can easily be detached from the hose to

remove blockages.

Figure

Opening the lid

● Open the lid by moving the locking lever in the

direction of the arrow.

Figure

a)Seal the dust bag by pulling the sealing tab, and

remove the bag.

b)Insert the new dust bag into the holder up to the

stop.

Caution: the lid will only close if a dust bag has

been inserted.

Cleaning the motor protection filter

The motor protection filter should be cleaned regularly

by knocking out the dirt and rinsing.

Figure

● Open the dust bag compartment lid.

Figure

● Remove the motor protection filter from the appliance

in the direction of the arrow.

● Separate the motor protection filter from the Bionic

filter.*

23*

GA 9000 584 322_GL50_B_Tierhaarduesen:GL50 Tierhaar 26.10.2010 17:00 Seite 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BSGL 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BSGL 50 Manual

Product: