en
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
Fold out picture pages.
Before using for the first time
Figure
Push the handle onto the flexible hose until it engages.
Figure
Push the crevice nozzle and upholstery nozzle back into the
accessories holder as illustrated.
Setting up
Figure
a) Push the flexible tube adapter into the air intake opening in
the vacuum cleaner lid until it engages
b) To remove the flexible hose, press the two lugs together and
pull the tube out.
Figure
a) Connect together the handle and vacuuming/telescopic
tube.
b) Push the handle into the telescopic tube until it engages.
Press on the locking collar and pull out the telescopic tube
to disconnect.
Figure
a) Insert the suction pipe into the floor tool adapter.
b) Push the telescopic tube straight into the connecting piece
of the floor tool until it engages.
Press on the locking collar and pull out the telescopic tube
to disconnect.
Figure
a) Connect the suction pipes together.
b) Release the telescopic tube by moving the adjusting
sleeve/sliding switch in the direction of the arrow and adjust
the tube to the required length.
Figure
Holding the power cord by the plug, pull out the required
length and plug the plug into the mains socket.
Figure Switching on/off
Ⅲ
Your appliance is fitted with a pop-out control button.
Ⅲ
To switch on the appliance, press the control button in the
direction of the arrow down to the stop and release. This will
release and extend the controller.
Ⅲ
To switch off the appliance, press the control button in again
down to the stop. This will leave the control button retracted
in the appliance.
8
7
6*
5*
4*
3
2*
1*
Controlling the suction level
Figure
The required suction level can be set to any level required
by turning the control knob in the direction of the arrow.
Ⅲ
Low suction range =>
For vacuuming delicate fabrics,
e.g. curtains.
Ⅲ
Medium suction range =>
For daily vacuuming of lightly
soiled floors.
Ⅲ
High suction range =>
For vacuuming durable floor coverings,
hard floors and for heavily soiled surfaces.
Vacuuming
Figure
Adjusting the floor tool:
Ⅲ
Rugs and carpets =>
Ⅲ
Hard floors =>
Figure
Remove the upholstery nozzle and crevice nozzle from the
accessories holder as illustrated.
Figure Vacuuming with accessories
Attach the nozzles to the tube or handle as required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c) Hard furnishings brush
For cleaning window frames, cabinets, mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet flooring,
etc.)
Push the telescopic tube into the connecting piece of the
hard-floor brush until it engages.
Press on the unlatching sleeve and pull out the telescopic
tube to disconnect.
Figure
After use, push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush, please
consult the accompanying instruction manual for notes on its
use and maintenance.
Figure
You can use the parking aid on the back of the vacuum
cleaner if you wish to stop vacuuming for a short time.
Once you have switched off the vacuum cleaner, slide the
catch on the floor tool into the recess on the rear of the
appliance.
Figure
The appliance can also be carried using the carrying handle
when vacuuming steps, for example.
15
14
13
12*
11
10
9
*
Dependent on model
9
