Manual Bosch BSG 82012 (page 14 of 138) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

73284

Zoom out

Zoom in

1/138

Replacing the active carbon filter*

If your vacuum cleaner is fitted with an active carbon filter, this

must be replaced once a year.

Figure

Ⅲ

Remove the active carbon filter and dispose of it with

the household rubbish.

Ⅲ

Insert a new active carbon filter.

(See Figures 21, 22, 23

for changing the filters)

Care

Always switch off the vacuum cleaner and disconnect the

power cord from the mains before cleaning the appliance.

The vacuum cleaner and plastic accessories can be cleaned

with a commercial plastic cleaner.

Do not use a scourer, glass-cleaning agent or all-pur-

pose cleaning product.

Never immerse the vacuum cleaner in water.

The dust compartment can, if necessary, be cleaned with a

second vacuum cleaner or simply wiped with a dry cloth or

dusting brush.

Subject to technical modifications.

24*

Cleaning the motor protection filter

The motor protection filter should be cleaned regularly by

knocking out the dirt and rinsing.

Figure

Ⅲ

Open the dust bag compartment lid (see Figure 17).

Ⅲ

Pull out the motor protection filter in the direction of the

arrow.

Ⅲ

Clean the motor protection filter by tapping it.

Ⅲ

If it is very dirty, the motor protection filter should be

rinsed.

The filter must then be left to dry for at least 24 hours.

Ⅲ

After cleaning, insert the motor protection filter into the

appliance as far as it will go and close the dust bag

compartment lid.

You can obtain a new motor protection filter on request as

a spare part from the after-sales service. (see Spare parts,

page 13 )

Changing the micro-hygiene filter*

The micro-hygiene filter should be replaced with every new

replacement filter pack (after 5 dust bags) and at least

once a year.

Figure

Ⅲ

Press the locking tab in the direction of the arrow to

unlatch the exhaust grille and open it.

Ⅲ

Unlatch and remove the filter frame by pressing the tab

in the direction of the arrow.

Figure

Ⅲ

Remove the foam and micro-hygiene filter.

Ⅲ

Dispose of the micro-hygiene filter and fit a new micro-

hygiene filter.

Ⅲ

Clean the foam and replace in the filter frame.

If you have used the vacuum cleaner for fine dust particles

(such as plaster or cement), clean the motor protection fil-

ter by tapping it and, if necessary, replace the motor protec-

tion filter and the micro-hygiene filter.

Figure

Ⅲ

Slide the filter frame under the two retaining ribs and push

in the direction of the arrow until it engages.

Ⅲ

Close the exhaust grille.

Replacing the Hepa filter*

If your vacuum cleaner is fitted with a HEPA filter,

this must be replaced once a year. (See figures 21 and 23 for

changing the filter)

22*

Innenteil 358 918 A 19.03.2008 8:07 Uhr Seite 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BSG 82012 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BSG 82012 Manual

Product: