Manual Bosch bsg 61666 logo hepa (page 13 of 101) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

319717

Zoom out

Zoom in

1/101

Please note

The mains socket must be protected by at least a 16

amp fuse.

If a fuse should blow when you switch on the appliance,

this may be because other electrical appliances which

have a high current draw are connected to the same

power circuit.

To prevent the fuse from blowing, select the lowest

power setting before switching the appliance on, and

increase the power only once it

is running.

Fold out picture pages.

Before using for the first time

Figure

Push the handle onto the flexible tube and until it engages.

Figure

Push the crevice nozzle and upholstery nozzle back into the

accessories holder as indicated.

Setting up

Figure

a) Push the flexible hose adapter into the air intake opening on

the vacuum cleaner lid until it engages.

b) To remove the flexible hose, press the two lugs together and

pull the tube out.

Figure

a) Push the handle into the suction pipe/telescopic tube.

To remove it, turn the handle slightly and pull it off the tube.

b) Push the handle straight into the telescopic tube until it

engages.

To release the connection, squeeze the collar sleeve and

pull the handle out.

Figure

a) Connect the floor tool and the telescopic tube together.

b) Push the telescopic tube straight into the

connecting piece of the floor tool until it engages.

To release the connection, squeeze the locking collar and

pull the telescopic tube out.

Figure

a) Connect the suction pipes together, or

b) Unlock the telescopic tube to adjust its length by moving

the sliding switch in the direction of the arrow.

Figure

Holding the power cord by the plug, pull out the required

length and plug it into the mains socket.

Figure

Press the on/off button in the direction of the arrow to

switch your vacuum cleaner on/off.

Figure

Adjust the suction by turning the on/off button in the

direction of the arrow.

Vacuuming

Figure

Adjusting the floor tool:

Ⅲ

Rugs and carpets =>

Ⅲ

Hard surfaces =>

Figure

Adjust the "autofloor" floor tool:

Ⅲ

Hard floor setting =>

Fixed position for vacuuming hard

floors/ parquet

Ⅲ

Automatic setting => auto

The nozzle adjusts automatically to the floor covering and

switches from hard floors / parquet

to carpeted floors

Ⅲ

Carpet setting =>

Fixed position for vacuuming rugs and

carpets

If you are vacuuming varying types of floor coverings (hard

floors <-> carpets), we recommend that you use the

automatic setting so that the nozzle adjusts automatically

to the floor and you do not need to switch over the nozzle

setting.

Figure

Remove the upholstery nozzle and crevice nozzle from the

accessories holder as illustrated.

Figure

Vacuuming with accessories

Attach the nozzles to the suction pipe or handle as required:

a) Crevice nozzle for vacuuming crevices and corners, etc.

b) Upholstery nozzle for vacuuming upholstered furniture,

curtains, etc.

c) Hard furnishings brush

For cleaning window frames, cabinets, mouldings, etc.

d) Hard-floor brush

For vacuuming hard floor coverings (tiles, parquet flooring,

etc.)

Figure

After use, push the crevice nozzle and upholstery nozzle

back into the accessories holder as indicated.

Turbo brush

If your vacuum cleaner is equipped with a turbo brush, please

consult the accompanying instruction manual for notes on use

and maintenance.

13*

11*

Depending on equipment

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch bsg 61666 logo hepa in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch bsg 61666 logo hepa Manual

Product: