592008

Bosch BLE 200 Professional Manual

22
Zoom out
Zoom in
Previous page
1/267
Next page
1 609 929 L81 | (20.7.07) Bosch Power Tools
22 | English
Operating Instructions
Marking
The height of the laser beam can be marked at the centre mark 7
on the right and left of the measuring tool when it runs through the
centre of the reception area 6. The centre mark is 50 mm away
from the upper edge of the measuring tool.
Aligning with the Spirit Level
The measuring tool can be aligned vertically (plumb line) with the
spirit level 1. A measuring tool applied out-of-level leads to faulty
measurements.
Attaching with the Holder (see figure A)
With the holder 14, the measuring tool can be fastened to a con-
struction laser measuring rod 16 (accessory) as well as to other
auxiliary tools with a width of approx. 5 to 50 mm.
Slide the holder 14 sidewards into the retainer openings 8 on the
rear side of the measuring tool until it can be heard to latch.
Loosen the locking screw 17, slide the holder onto the construc-
tion laser measuring rod 16, for example, and retighten the locking
screw 17.
The upper edge 15 of the holder is located at the same height as
the centre mark 7 and can be used for marking of the laser beam.
To remove the measuring tool from the holder 14, press the holder
latch 13 and pull the measuring tool out of the holder.
Attaching with the Magnet (see figure B)
When a positive-lock attachment is not absolutely required, the
measuring tool can be attached to steel parts via the face and rear
side using the magnet plate 12.
OBJ_BUCH-71-002.book Page 22 Friday, July 20, 2007 10:07 AM
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BLE 200 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BLE 200 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info