620127
38
Zoom out
Zoom in
Previous page
1/128
Next page
37
Figure
If the plate filter is particularly dirty, it can also be
rinsed clean.
Turn the bottom part of the filter system clockwise
as far as the stop.
Remove the plate filter from the filter system.
Rinse the filter under running water.
When it has dried completely, insert the plate filter
into the filter system and lock the bottom part by tur-
ning it anticlockwise.
Under normal circumstances, and the appliance is used
as intended for household cleaning, the plate filter
does not need to be removed or cleaned manually in
order to achieve the optimum power level.
!Do not brush the filter.
For simple dry cleaning, simply tap the filter around
the edge of the cap.
For more thorough cleaning, rinse the filter from the
outside with water, and allow it to dry completely
before using it in the vacuum cleaner again.
Figure
a)Unlock the dust container and take it out of the
appliance.
b)Take the filter unit out of the dust container.
c)Clean the fluff filter.
When emptying the dust container, always check how
dirty the fluff filter is and, if necessary, clean it as
detailed in the “Cleaning the fluff filter” instructions.
Cleaning the fluff filter
The fluff filter should be cleaned at regular intervals in
order to ensure optimum operation of the vacuum clea-
ner. It is usually sufficient to lightly shake or tap out
the filter housing when the dust container is emptied in
order to dislodge any particles of dirt.
!Caution: the fluff filter must not be cleaned under
running water.
The Hepa filter is designed so that it does not need to
be replaced if the appliance is used as intended for
household cleaning. To ensure that the vacuum cleaner
keeps working at its optimum performance level, the
Hepa filter should be rinsed clean after approx. 3 years.
The filtering effect of this filter in maintained, even
though the filter surface may become discoloured.
26
25
*Dependent on model
Rinsing the Hepa filter
Figure
a)Open the exhaust grille by pressing the release button.
b)Unlock the Hepa filter by pressing the locking tab
and remove it from the appliance.
c)Tap out the Hepa filter and rinse under running water
d)Do not re-insert the Hepa filter into the appliance
until it has completely dried and then close the
exhaust filter compartment.
Cleaning instructions
Always switch off the vacuum cleaner and disconnect it
from the mains before cleaning the vacuum cleaner.
The vacuum cleaner and plastic accessories can be cle-
aned with a conventional plastic cleaner.
!Do not use scouring agents, glass or all-purpose
cleaners. Never immerse the vacuum cleaner in
water.
Subject to technical modifications.
27
GA 9000 822 296_GS60 30.11.2012 14:56 Seite 37
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BGS6PRO2 - GS60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGS6PRO2 - GS60 in the language / languages: All languages as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info